|
Title: ME7.5 identifying certain maps in areas Post by: strhkpf on October 30, 2025, 05:05:43 AM Hello together,
I'm trying to identify two map-areas in my ECU by comparing the ORI file and STAGE1 (which my car is currently running with, bought it like that), but can't get a clue which map it could be. I've already downloaded several .xdf, .kp and .ols files but this area is not mapped in either one of those (tried 018F, 018Q and some transfered to 018M). Fortunately, I've verified and compared following maps, which are different between ORI and STAGE1: - KFMIRL - KFLDIMX - KFPED - KFMIOP - NMAX - NMAXDV - VABSH - KFZW - KFZW2 - RLVMXN - RLVSMXN - LAMFA - LDRXN - LDRXNZK Current ECU, engine, flash: 8L0906018M 0002 354094 (narrowband), APX engine code, verified ORI by flashing and driving after crosschecking with STAGE1, runs good on ORI and STAGE1 Areas to be defined: - 1FC68 to 1FE1E, i believe there could be two maps, only slight changes - 67F8E to 67F9D, could be one map, only slight changes, tried playing with sizes but can't get a clue Anything else beside mentioned maps and those two areas are the same Main goal is to identify the changed maps and taking them over to 8N0906018CB for a wideband conversion, ECU ready even with immo off. Hope someone can identify these, attached the ORI file for reference, STAGE1 file not uploaded due to copyright reasons. Best regards, strhkpf |