|
Title: S3 8L Cant not Flash read ECU Post by: Gizmo20VT on August 14, 2012, 08:37:48 AM Hi guys
My first official post on this site, Have been reading up on the software and also done a search to see if I could resolve the problem myself but the post didnt help much. My current goal is to flash my '02 s3 8l amk back to stock as I have wired up a piggyback to the system which I can map as my hex decimal coding is pretty terrible :-X, I purchased the car about 4 months ago and after replacing some components and logging I beleive its mapped, running 19 psi then dropping off after 5k. I have downloaded the stock AMK.bin file in the original ecu file section, but when I try read my ecu I get a memory layout error, I do have the option to load a memory layout but before trying it I would like to confirm if there is a specific one for my ECU in the folder. Print Screen of the Code and My ECU info, (http://i435.photobucket.com/albums/qq71/tpietersen123/ECUinfo.jpg) (http://i435.photobucket.com/albums/qq71/tpietersen123/Flashreaddisabled.jpg) Any advice would be much appriciated, Thank you ;D Title: Re: S3 8L Cant not Flash read ECU Post by: Gizmo20VT on August 14, 2012, 09:47:22 AM My apology, with further searching I found that most cars after 2000/2001 use 800 ;D I have pulled the .bin successfully, will upload in the tuned ecu file section for input.
|