|
Title: XDF for 2.8 24V BDE ME7.1.1 Post by: BoraVr6 on April 04, 2026, 02:52:32 AM Hey, can someone help me?
I cant find a xdf file online and need it for tunerpro. I'm new to the ecu tuning thing and some help would be great :) Gesendet von meinem SM-A336B mit Tapatalk Title: Re: XDF for 2.8 24V BDE ME7.1.1 Post by: grayjay on April 04, 2026, 09:05:13 AM Hey, can someone help me? I cant find a xdf file online and need it for tunerpro. I'm new to the ecu tuning thing and some help would be great :) Gesendet von meinem SM-A336B mit Tapatalk The site search function does not work, try searching nefmoto from browser to find info on your ECU software number, something like search line; site:http://nefariousmotorsports.com 022906032BG but use whatever exact ECU number you actually are looking for. I dont find a xdf for 022906032BG but there is a winOLS kp file for it at thread; https://nefariousmotorsports.com/forum/index.php?topic=18756.msg141690#msg141690 Also note that ME7.1.1 requires that you remove a resistor from the board to be able to enter boot mode for EEPROM reads/writes, then the resistor must be replaced to enable regular OBD port flashing; http://nefariousmotorsports.com/forum/index.php?topic=21504.0 Title: Re: Re: XDF for 2.8 24V BDE ME7.1.1 Post by: BoraVr6 on April 05, 2026, 03:45:34 AM The site search function does not work, try searching nefmoto from browser to find info on your ECU software number, something like search line; Thank you so much for the infos and links. site:http://nefariousmotorsports.com 022906032BG but use whatever exact ECU number you actually are looking for. I dont find a xdf for 022906032BG but there is a winOLS kp file for it at thread; https://nefariousmotorsports.com/forum/index.php?topic=18756.msg141690#msg141690 Also note that ME7.1.1 requires that you remove a resistor from the board to be able to enter boot mode for EEPROM reads/writes, then the resistor must be replaced to enable regular OBD port flashing; http://nefariousmotorsports.com/forum/index.php?topic=21504.0 Title: Re: XDF for 2.8 24V BDE ME7.1.1 Post by: BoraVr6 on April 05, 2026, 04:00:25 AM Is there maybe a good converter for .kp to.xdf? I dont habe OLS and no friends with it.
And is it possible that my ECU is already flashed? Motor goes up to a lil over 7k rpm and with MPPS i coud read a good bin file. It shows that its already flashed once so do i still need to do the resistor and boot mode? Gesendet von meinem SM-A336B mit Tapatalk |