|
Title: New user.. been a member for a little while... can someone help me out Post by: jdm ej1 95 on August 17, 2012, 05:59:13 PM i have a previously flashed ecu.. its flashed by a company that is no longer around as of recent.. and i am trying to get the file from it.
the file was originally flashed on an APR based server. so obviously i tried nefmoto software and the flash failed because it failed to verify the memory layout. im assuming because there is protection on the tune.. is there any way i can get this file? Title: Re: New user.. been a member for a little while... can someone help me out Post by: matchew on August 17, 2012, 06:51:02 PM Why do you want it?
Title: Re: New user.. been a member for a little while... can someone help me out Post by: phila_dot on August 17, 2012, 07:07:56 PM You don't need to verify the layout.
Have you actually connected and tried to read? If all else fails, there is always bootmode with Galletto. Title: Re: New user.. been a member for a little while... can someone help me out Post by: jdm ej1 95 on August 17, 2012, 07:23:29 PM Yea I tried.. ill post the log tomorrow.... I want it so I can start self tuning with a solid base... It's not a full tune just break in... BTW the car is a 3.0l s4 with gt28rs. Mafless but I also have a maf setup..
Title: Re: New user.. been a member for a little while... can someone help me out Post by: prj on August 18, 2012, 01:36:08 AM Yea I tried.. ill post the log tomorrow.... I want it so I can start self tuning with a solid base... It's not a full tune just break in... BTW the car is a 3.0l s4 with gt28rs. Mafless but I also have a maf setup.. Start from scratch. Title: Re: New user.. been a member for a little while... can someone help me out Post by: jdm ej1 95 on August 18, 2012, 10:05:12 AM Start from scratch. will it be possible to simply flash over this file? im trying to get a spare ecu so i can do just that.. but it would also be nice to have a good starting point... seeing as i dont really have much free time. Title: Re: New user.. been a member for a little while... can someone help me out Post by: phila_dot on August 18, 2012, 12:36:42 PM will it be possible to simply flash over this file? im trying to get a spare ecu so i can do just that.. but it would also be nice to have a good starting point... seeing as i dont really have much free time. Get a Galletto cable and bootmode it. The learning curve is steep and your setup isn't exactly simple. I don't see an ethical issue here. Why MAFless though? Title: Re: New user.. been a member for a little while... can someone help me out Post by: jdm ej1 95 on August 19, 2012, 08:55:03 AM definitely not a tune i could even do something unethical with...
its a 13psi base file that doesnt run 100% it was just something to use while getting the motor broken in. i was going to run 034 standalone so i planned everything to be mafless. but when the time came i didnt have the money to do 034 so i was stuck with the stock ecu mafless.. it runs pretty good as it is and made nearly 400awhp.. but its time for more. i do have a 2.5 inch y pipe setup i built with a 90mm MAF elbow(hitachi).. so i may just toss that back on and find a decent base file to start with.. but i cant seem to find any 90mm tunes. although i assume i can probably use an 85mm tune to start and tweak from there. Title: Re: New user.. been a member for a little while... can someone help me out Post by: Snow Trooper on August 24, 2012, 10:56:14 AM So you want to pull your shit box vast tune... I see. Don't bother.
Title: Re: New user.. been a member for a little while... can someone help me out Post by: jdm ej1 95 on August 24, 2012, 11:39:46 AM Let's not turn it into that... Mike is a talented tuner. A very smart guy I just think some things got in the way of that.
anywho.. so if i create a new base file.. i SHOULD Be able to flash over the file on my ecu currently with nefmoto? im going back to MAF. and im pretty sure i could handle making a file that runs ok. |