|
Title: Read and Write Eeprom on OBD2 Me7.5 Post by: Kacpern on June 17, 2026, 12:57:48 AM Hello, what can read and write EEPROM via OBD2 in ME7.5? It's read using a standard KKL cable. But is there a cable that can write it via OBD?
Title: Re: Read and Write Eeprom on OBD2 Me7.5 Post by: BlackT on June 17, 2026, 06:02:43 PM Vag dash CAN
Title: Re: Read and Write Eeprom on OBD2 Me7.5 Post by: royce5950 on June 25, 2026, 12:50:07 AM Solder a tiny thin short piece of wire attached to the boot pad on ME7.5 and make it so that the wire runs straight out the side of the casing no more than 1/16” and that way in the future if you ever have to do anything boot mode related you don’t need to remove and open up the module you can just connect in boot mode by shorting the tip of that wire you put on there and now your set for the long haul
|