|
Title: BAM ME7.5 without EGT sensor – keeping BTS protection from APY Euro3 Post by: Shiro on June 29, 2026, 05:35:20 AM Hi everyone,
I'm converting a BAM ME7.5 ECU to run on an engine without an EGT sensor. I disabled the EGT sensor in ESKONF so the ECU no longer expects the hardware. However, I still want to keep the BTS (component protection) enrichment based on the calculated exhaust gas temperature, similar to how APY/APX software works without a physical EGT sensor. I copied the BTS-related maps from an APY Euro 3 file into the BAM binary, but I'm not sure if that's enough. My questions are: * Is disabling the EGT sensor in ESKONF sufficient, or are there any other switches that need to be changed? * Besides the BTS maps, are there any other maps or constants that should be copied from APY/APX? * Will the BAM software still use the calculated EGT model for BTS enrichment, or does it rely on the physical EGT sensor once the sensor is disabled? I'm trying to keep the factory BTS protection, just without the physical EGT sensor. Thanks! Title: Re: BAM ME7.5 without EGT sensor – keeping BTS protection from APY Euro3 Post by: VWvinny on July 01, 2026, 05:39:31 AM Offcourse some DTC's, rescale KFLBTS, set KFRLATR to 191,250, CATR to 0 that will do the trick.
Title: Re: BAM ME7.5 without EGT sensor – keeping BTS protection from APY Euro3 Post by: Shiro on July 06, 2026, 09:04:59 AM Could you check if I did this correctly? Thanks ;D
Title: Re: BAM ME7.5 without EGT sensor – keeping BTS protection from APY Euro3 Post by: VWvinny on July 06, 2026, 11:53:39 AM Could you check if I did this correctly? Thanks ;D Nice job! Just a few tweeks ;) Title: Re: BAM ME7.5 without EGT sensor – keeping BTS protection from APY Euro3 Post by: Shiro on July 07, 2026, 07:01:38 AM Just to clarify, the BTS will still work, just without the EGT sensor, right? Like in the APX/APY?
Title: Re: BAM ME7.5 without EGT sensor – keeping BTS protection from APY Euro3 Post by: VWvinny on July 08, 2026, 02:04:39 AM Just to clarify, the BTS will still work, just without the EGT sensor, right? Like in the APX/APY? Thats correct Title: Re: BAM ME7.5 without EGT sensor – keeping BTS protection from APY Euro3 Post by: Shiro on July 09, 2026, 07:40:06 AM Okay, thank you very much for your help ;D
Title: Re: BAM ME7.5 without EGT sensor – keeping BTS protection from APY Euro3 Post by: Shiro on July 11, 2026, 11:05:07 AM This is what WOT looks like in 3rd gear.
Title: Re: BAM ME7.5 without EGT sensor – keeping BTS protection from APY Euro3 Post by: Shiro on July 11, 2026, 02:09:45 PM My N75 is broken :(
Title: Re: BAM ME7.5 without EGT sensor – keeping BTS protection from APY Euro3 Post by: Shiro on July 12, 2026, 04:06:58 PM New N75, Is everything okay?
Title: Re: BAM ME7.5 without EGT sensor – keeping BTS protection from APY Euro3 Post by: aef on July 13, 2026, 04:31:29 AM everything fine until 5500 rpm
you should fix your boost request at 5500 |