NefMoto

Technical => Tuning => Topic started by: nyet on August 20, 2012, 08:43:03 AM

Title: Need to disable secondary air on 4z7907551k
Post by: nyet on August 20, 2012, 08:43:03 AM

anybody have a map location for CDSLS et al on a Allroad tip k box? (4z7907551k)

Title: Re: Need to disable secondary air on 4z7907551k
Post by: professor on August 20, 2012, 09:05:18 AM

Try at 0x181B0.

Title: Re: Need to disable secondary air on 4z7907551k
Post by: nyet on August 20, 2012, 09:20:22 AM

Thanks.

This is my first tip car. Will I also have to modify CLASLVE/CLASLPE?

Title: Re: Need to disable secondary air on 4z7907551k
Post by: nyet on August 20, 2012, 09:21:36 AM

Oh, I also have a full map pack for r-box. Can i flash r-box over k-box?

Title: Re: Need to disable secondary air on 4z7907551k
Post by: professor on August 20, 2012, 10:51:48 AM

Quote from: nyet on August 20, 2012, 09:20:22 AM

Thanks.

This is my first tip car. Will I also have to modify CLASLVE/CLASLPE?

As far as i know:
CLASLVE yes
CLASLPE no

Title: Re: Need to disable secondary air on 4z7907551k
Post by: prj on August 20, 2012, 03:24:05 PM

Set CWKONABG to 0. Will disable cat heating, and all SLS stuff.

Title: Re: Need to disable secondary air on 4z7907551k
Post by: professor on August 20, 2012, 03:49:15 PM

Quote from: prj on August 20, 2012, 03:24:05 PM

Set CWKONABG to 0. Will disable cat heating, and all SLS stuff.

Correct forgot that!
Loc: 0x181B9

Title: Re: Need to disable secondary air on 4z7907551k
Post by: nyet on August 20, 2012, 03:51:50 PM

ONLY set that to zero, leave the other stuff stock?

Also, what other allroad/A6 files can I flash onto this ECU? Is ME7.1.1 out (BEL?, R etc?)

What S4 APB files can i flash onto it? L box?

Keep in mind i'm a tip (and A6) noob.

Title: Re: Need to disable secondary air on 4z7907551k
Post by: prj on August 20, 2012, 11:16:36 PM

Yea if you need to remove SLS, only set CWKONABG to 0.
I have done this on my RS4, removed the SAI pump and all was good, not a single code.

However, if you want to remove the solenoid valve that controls the kombi valves you might need to remove it's diagnosis as well, so that the fuel trims work.
I am not 100% sure about this though, I will let you know once I get my RS4 moving again.