|
Title: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: Milka on August 28, 2012, 09:32:21 PM Car is a 2003 RS6 with the following mods:
Alcon Front brake upgrade 370mm Hotchkiss sways KWv3 Coilovers Custom Catch Can arrangement Re-cored intercoolers with 4.25' thick intercoolers Upgraded Diverter valves Wagner Silicon Hose kit B7 RS4 Wheels Milltek Downpipes Milltek Exhaust Deletes, n75, n249, n112, secondary 02s Blitz i-color spec-R boost controller Dual Twin Scroll GTX3071 Turbos (T3 divided inlet/vband outlet: turbine housing) Dual 38 mvs water cooled external wastegates (springs set at 12psi) Manual conversion using OA3 (B7 RS4) gearbox Clutchmasters FX 850 twin plate clutch Currently running Automatic Tune (Need to do a proper tune for her) Next Steps: Upgrade Injectors to 850cc EV14 (Stock injectors are maxed out at 12psi) Upgrade MAFs to S4 housings Surge tank with twin pierburg pumps At this point I should be able to run 15-18psi if the engine holds together ;) Future: I'm currently building an engine with: Fully worked heads (heavy duty valve springs, Ti retainers, Oversize one piece stainless valves) Pauter Rods Mahle Forged Pistons Cams, not sure yet. Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: Milka on August 28, 2012, 09:52:43 PM During fabrication
(http://i119.photobucket.com/albums/o144/Milka_photos/Annika/Turbos_Mounted_20002-1.jpg) (http://i119.photobucket.com/albums/o144/Milka_photos/Annika/DumpPipes005-1.jpg) (http://i119.photobucket.com/albums/o144/Milka_photos/Annika/Turbos_Mounted_20004.jpg) (http://i119.photobucket.com/albums/o144/Milka_photos/Annika/DumpPipes003-1.jpg) Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: Milka on August 28, 2012, 09:56:38 PM Ready to put back into the car
(http://i119.photobucket.com/albums/o144/Milka_photos/Annika/FullEngine006.jpg) (http://i119.photobucket.com/albums/o144/Milka_photos/Annika/FullEngine008.jpg) (http://i119.photobucket.com/albums/o144/Milka_photos/Annika/FullEngine007.jpg) (http://i119.photobucket.com/albums/o144/Milka_photos/Annika/FullEngine005.jpg) (http://i119.photobucket.com/albums/o144/Milka_photos/Annika/FullEngine003.jpg) Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: matchew on August 28, 2012, 10:03:08 PM The images do not display as they are hosted by another forum that requires a password.
Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: Milka on August 28, 2012, 10:11:50 PM Doh! Ok I will have to find some time to upload them somewhere else, I totally did not even think about it and of course I was logged into the other forum... I will fix it very soon, sorry
Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: Milka on August 28, 2012, 10:39:24 PM Here you go, let me know if that works better, tried using photobucket instead
Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: matchew on August 28, 2012, 10:44:45 PM works fine now
nice work :) Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: marcellus on August 30, 2012, 02:02:14 PM HOT DAMN :o!
Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: SteveKen on August 30, 2012, 04:04:29 PM That is very nice. Welcome to the 6 speed RS6 club.
I'd love to hear about the compatibility of the 0A3 with the RS6 block. Please PM me with some details at your earliest convenience. Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: johnjohn on September 06, 2012, 09:12:57 PM Using the 0A3 should do fine thats the gearbox Champion Racing used with their RS6 for the season.
Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: jibberjive on September 24, 2012, 07:14:42 PM Love it. Nice build!
Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: sweegie on September 25, 2012, 01:19:46 PM Epic stuff! Nice to see another RS6 on here :)
Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: jdm ej1 95 on September 26, 2012, 04:45:01 PM must see moar
Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: Milka on September 26, 2012, 05:22:34 PM I have a full build thread on another forum with pretty much everything documented and tons of pics, only thing is you would need to register to view the pics. If there is anything specific you would like to see let me know and I will re-post pics here otherwise you can check out: http://www.ozaudi.com/forums/showthread.php/20790-Milka-s-RS6-Build-thread/page6 (http://www.ozaudi.com/forums/showthread.php/20790-Milka-s-RS6-Build-thread/page6)
Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: Milka on April 24, 2020, 05:34:51 AM Ok back for some more work since the original post car has done something like 40k kms, now running a Tilton Triple plate carbon-carbon clutch, 1000cc EV14 injectors.
One of the turbos has injested something, not sure how, but doesn't really matter a refresh is required... Has anyone done a comparison between the original GTX3071 vs the GTX3071 GEN2? Or a similar Gen v Gen2 comparison? Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: streacy on June 25, 2020, 07:46:24 AM Wow, great work
Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: Milka on June 25, 2020, 04:08:27 PM Thanks mate, big update should be coming soon!
Wow, great work Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: LeeMee on February 01, 2021, 09:50:35 AM Great project.
How have you got on with the Manual software in the ecu ? That seems to be a sticking point on a lot of these conversions. Regards Leemee Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: jibberjive on February 26, 2021, 04:03:32 PM Hey milka, any update on your project?
Title: Re: Milka's RS6 Build, Dual Twin Scroll GTX3071s, Tial MVS Gates, Manual Conversion! Post by: Milka on March 25, 2021, 10:31:35 PM Sorry everyone, work got in the way over the last few months. I’m slowly building the engine in my home made clean room, I’ll see if I can post some pics
Sent from my iPhone using Tapatalk |