|
Title: 8N0 906 018 BH - xdf definition file Post by: madswp on September 01, 2012, 01:09:30 PM hi everybody
posting my first xdf file for the 8N0906018BH ecu. this is my first attempt to create a xdf. there is lot of room to improvement and it needs a lot of definitions. specially the MLHFM. kan anybody help to set that up right? this is taking a lot of time for me so please comment the xdf if something is wrong or should be done another way. i will keep working on it and post it again when hopefully it becomes free of faults. regards. Title: Re: 8N0 906 018 BH - xdf definition file Post by: madswp on September 01, 2012, 01:12:29 PM already found a couple of faults. will keep looking
Title: Re: 8N0 906 018 BH - xdf definition file Post by: madswp on September 01, 2012, 01:29:08 PM this one is better
Title: Re: 8N0 906 018 BH - xdf definition file Post by: madswp on September 08, 2012, 02:12:12 PM last
Title: Re: 8N0 906 018 BH - xdf definition file Post by: Il Signor Zetec on September 12, 2012, 10:27:50 AM hello, thank you for your "test".
I'm trying to find some maps and axis address and seems that you have the rights. I have only some doubt (I verified only KFLBTS, KFLAMKR, KFLAMKRL and LAMFA) on the lamfa addresses: this is what I have with your values. Thank you bye Luca Title: Re: 8N0 906 018 BH - xdf definition file Post by: madswp on September 16, 2012, 12:48:50 AM hello, thank you for your "test". I'm trying to find some maps and axis address and seems that you have the rights. I have only some doubt (I verified only KFLBTS, KFLAMKR, KFLAMKRL and LAMFA) on the lamfa addresses: this is what I have with your values. Thank you bye Luca i have just checked LAMFA on my own stock bin file. it looks fine imo. what ecu are you using this definition file fore? looks like you need to setup your axis's right. when i added LAMFA in the xdf file i remember it looked like that. swap axis and set it up right then you are fine. i assume you are using winols? try tunerpro and see if you get the same values. Title: Re: 8N0 906 018 BH - xdf definition file Post by: professor on September 16, 2012, 01:13:11 AM Lamfa is located on 0x1C98A
Title: Re: 8N0 906 018 BH - xdf definition file Post by: madswp on September 16, 2012, 01:22:24 AM Lamfa is located on 0x1C98A thanks professor ;) have changed value to 1C98A. looks better. will upload again once i get more maps filled in. is it not possible in this forum to edit the uploaded files? or is it only the text? Title: Re: 8N0 906 018 BH - xdf definition file Post by: Il Signor Zetec on September 17, 2012, 01:05:32 PM i have just checked LAMFA on my own stock bin file. it looks fine imo. what ecu are you using this definition file fore? looks like you need to setup your axis's right. when i added LAMFA in the xdf file i remember it looked like that. swap axis and set it up right then you are fine. i assume you are using winols? try tunerpro and see if you get the same values. thank you, changing between them axis and columns/row I had a correct map, but as "professor" the right address is 1c98A, with a richer afr at 100% load. Thanks to both :) |