|
Title: AUM just with 3 inch maf and s3 injectors (383@3bar) Post by: Vdub-dub on September 07, 2012, 03:51:52 PM to run AUM ecu with just 3 inch (225) maf and 225 s3 injectors just a case of copying over MLMFM and KRKTE over? or im i missing something?
both me7.5.5 Title: Re: AUM just with 3 inch maf and s3 injectors (383@3bar) Post by: littco on September 09, 2012, 06:54:27 AM I also did tvub, temin, which seemed to work fine from what I can tell
Title: Re: AUM just with 3 inch maf and s3 injectors (383@3bar) Post by: vagenwerk on March 05, 2013, 10:37:12 AM How about KFKHFM ? Is there small difference about somewhere to 7% in values between KFKHFM in Bam and AUM file ?
Should it be also copied ? Title: Re: AUM just with 3 inch maf and s3 injectors (383@3bar) Post by: littco on March 05, 2013, 10:51:03 AM How about KFKHFM ? Is there small difference about somewhere to 7% in values between KFKHFM in Bam and AUM file ? yes,Should it be also copied ? To be honest I've just run the 018cb file on the AUM Ecu without any issue.. Just delete the EGT and everything else is good... Title: Re: AUM just with 3 inch maf and s3 injectors (383@3bar) Post by: Bische on March 05, 2013, 08:16:07 PM If copying, might want to have FKKVS also :)
Title: Re: AUM just with 3 inch maf and s3 injectors (383@3bar) Post by: vagenwerk on March 06, 2013, 03:38:00 PM If copying, might want to have FKKVS also :) I only swap 3inch Maf to standard AUM file should i also have to copy FKKVS ? i run on standard 320cc injectors. |