|
Title: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: professor on September 12, 2012, 02:19:08 PM Hello
In my research of creating a decent map pack for 4b0906018AA 352728 APU engine 1.8T passat i am looking clarification of those map's addresses and values: TABGBTS: 0x1BE90 with value == -30 ? KFFDLBTS: 0x18EF7 with values at 6500rpm and high load == 0.2031 ? (think something its wrong here, i ve found this map exact above KFLBTS) UPWGVG: 0x14F3E with value == 3.4179 ? KRKTE: 0x18CBC with value == 0.1088 ? NMAXDV: 0x12B82 with values == 6600 ? (for rpm limiter found some maps on 0x12B7A && 0x12B7C are correct?) Thanks. Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: professor on September 13, 2012, 05:12:09 AM (http://boincstats.com/image/emoticon/beer.gif) BuMp (http://boincstats.com/image/emoticon/beer.gif)
Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: airtite on October 01, 2012, 09:16:14 AM any chance you are willing to share your existing map pack and I will try help find the maps you are looking for?
Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: airtite on October 01, 2012, 09:48:59 AM strange kfmirl is a 16x12 in this bin?
Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: k0mpresd on October 01, 2012, 10:11:35 AM strange kfmirl is a 16x12 in this bin? i dont think so. its 12x16 in an 018p (512kb file) i have. Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: airtite on October 01, 2012, 10:42:58 AM meant 12x16 at address 11948, just comparing it to the 1meg me7 files which have IRL as a 16x16
Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: professor on October 01, 2012, 10:58:43 AM KFMIRL its located at 11948 with 16x12 dimensions.
At 6F784, 1FC68, 1FDD8, its checksum area? Also for the KFFDLBTS @ 0x18EF7 i could use some verification :) airtite just show your posts. If you have any questions happily to answer. Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: prj on November 12, 2012, 04:54:58 AM I have a car I need to tune with this ECU.
ME7Logger only finds 4 variables with this one... It's an APU, but the car in question is swapped to AEB. professor, have you tried cross flashing this? I am thinking of finding a FWD AEB file and flashing. Might be easier... Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: prj on November 12, 2012, 05:06:19 AM Posting original...
Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: professor on November 12, 2012, 06:16:06 AM I have a car I need to tune with this ECU. ME7Logger only finds 4 variables with this one... It's an APU, but the car in question is swapped to AEB. professor, have you tried cross flashing this? I am thinking of finding a FWD AEB file and flashing. Might be easier... Posting original... I faced same problem with me7logger so i used vcds.Havent tried to flash AEB file on it. This car was running 006 sw version and put STG1 on it. Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: prj on November 12, 2012, 06:41:22 AM I see...
Well I will just find the variables that I need then. Screw VCDS. ME7Logger connects fine, so it's only the variables that are needed. Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: prj on November 12, 2012, 07:35:19 AM Never mind, I found the problem.
MPPS for some reason read it out as 1 MB file. After I deleted the second half I have all the needed variables :) Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: professor on November 12, 2012, 10:18:48 AM Never mind, I found the problem. Thats great :)MPPS for some reason read it out as 1 MB file. After I deleted the second half I have all the needed variables :) Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: kaross on December 17, 2015, 06:39:28 AM UPWGVG: 0x14F3E with value == 3.4179 ? Old Topic, but I found this only topic where is mention this UPWGVG. Can anyone explain me this? in damos: PWG-Spannungsschwelle für Vollgasbereich Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: TijnCU on December 17, 2015, 12:05:30 PM Thats about all there is to say, it is a voltage for recognizing full throttle in the pedal safety. U(voltage)PWG(pedal potmeters)VG(full throttle) I believe it is used to check if both potmeters are giving a similar signal during full throttle. (there is also UPWGTG wich is for part throttle)
Title: Re: ME7.5 512k narrow band-> 4B0906018AA map clarifications Post by: sebasapri on June 03, 2021, 12:25:55 AM Hi everybody !
Im looking for a kp or something useful for this file, Im working on AUDI A4 1.8T 20v 29f400 flash=512kb. hd 4B0906018AA sw 352728 thanks for your time. Seb |