|
Title: ME7.1 immo off - lamp blinking Post by: gregsback on September 20, 2012, 08:53:16 AM Dear all,
I have changed 0x12 and 0x22 in M95040 and corrected Checksums. Immo is off, but the lamp of immobilizer is blinking. fault code says "Adapt Key" Does anybody know what might be the rootcause? many thanks in advance! Greg Title: Re: ME7.1 immo off - lamp blinking Post by: matchew on September 20, 2012, 09:15:29 AM They keys arent adapted to the immo unit....
Title: Re: ME7.1 immo off - lamp blinking Post by: gregsback on September 20, 2012, 09:22:51 AM do you know waht to chane in the M95040 to overcome this issue?
Title: Re: ME7.1 immo off - lamp blinking Post by: prj on September 21, 2012, 02:07:37 AM do you know waht to chane in the M95040 to overcome this issue? Nothing. You already disabled the immo, so the car starts. What you need to do is adapt the keys to the cluster. The 95040 in the ECU has nothing to do with this. Title: Re: ME7.1 immo off - lamp blinking Post by: slowguy on October 02, 2012, 03:38:26 AM Nothing. You already disabled the immo, so the car starts. What you need to do is adapt the keys to the cluster. The 95040 in the ECU has nothing to do with this. I had the same issue with a previous ecu. Car would start but immo light kept blinking in dash. To adapt the keys to the cluster would you still need the 7 digit SKC to do this is VCDS? Title: Re: ME7.1 immo off - lamp blinking Post by: f1torrents on October 03, 2012, 04:29:09 AM Yes you still need the SKC. its only 4 digits though. And of course put the "0" in front of it. Title: Re: ME7.1 immo off - lamp blinking Post by: slowguy on October 03, 2012, 04:57:10 AM My immo is 3, and the ecu is 7.1.1. Is this 4 or 7 digits?
Title: Re: ME7.1 immo off - lamp blinking Post by: f1torrents on October 03, 2012, 05:07:13 AM its 4.
its always 4 Title: Re: ME7.1 immo off - lamp blinking Post by: masterj on October 04, 2012, 08:43:24 AM My immo is 3, and the ecu is 7.1.1. Is this 4 or 7 digits? Just open my me7 tuner wizzard (eeprom modder sheet). Load your ori eeprom and it will show you your SKC key |