|
Title: Took my first logs with the vag, need help understanding Post by: longliveaudi on October 30, 2012, 02:45:51 AM Im stage 3, was hitting 24 psi before front o2 sensors fail'd, then when i installed both front new o2 senors i peak at 13-14 psi WOT with lots of misfires.. if i hold boost.
Im not to sure what im looking for but as you can see i pull up these logs and codes from vag com. yes i have deleted them many times and they come right back on after 5 min of driving. What else should i log and is there a chart i can compare numbers. 16534 - Oxygen (Lambda) Sensor B2 S1 P0150 - 35-10 - Malfunction in Circuit - Intermittent 16514 - Oxygen (Lambda) Sensor B1 S1 P0130 - 35-10 - Malfunction in Circuit - Intermittent 15:44:45 Group 030: Lambda Control (Sensor Status) 111 Bank 1 Sensor 1 100 Bank 1 Sensor 2 111 Bank 2 Sensor 1 100 Bank 2 Sensor 2 15:44:45 Group 031: Lambda Control 0.050 V Bank 1 Sensor 1 (actual) 0.000 V Bank 1 Sensor 1 (specified) 0.075 V Bank 2 Sensor 1 (actual) 0.000 V Bank 2 Sensor 1 (specified) -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Address 01: Engine (8D0 907 551 M) 15:45:56 Group 001: General 880 /min Engine Speed (G28) 94.0°C Coolant Temperature (G62) 25.0 % Lambda Control Bank 1 19.5 % Lambda Control Bank 2 15:45:56 Group 030: Lambda Control (Sensor Status) 111 Bank 1 Sensor 1 100 Bank 1 Sensor 2 111 Bank 2 Sensor 1 100 Bank 2 Sensor 2 15:45:56 Group 031: Lambda Control 0.060 V Bank 1 Sensor 1 (actual) 0.000 V Bank 1 Sensor 1 (specified) 0.135 V Bank 2 Sensor 1 (actual) 0.000 V Bank 2 Sensor 1 (specified) -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Address 01: Engine (8D0 907 551 M) 15:46:05 Group 001: General 880 /min Engine Speed (G28) 94.0°C Coolant Temperature (G62) 25.0 % Lambda Control Bank 1 18.0 % Lambda Control Bank 2 15:46:05 Group 030: Lambda Control (Sensor Status) 011 Bank 1 Sensor 1 100 Bank 1 Sensor 2 111 Bank 2 Sensor 1 100 Bank 2 Sensor 2 15:46:05 Group 031: Lambda Control 0.060 V Bank 1 Sensor 1 (actual) 0.000 V Bank 1 Sensor 1 (specified) 0.070 V Bank 2 Sensor 1 (actual) 0.000 V Bank 2 Sensor 1 (specified) -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Address 01: Engine (8D0 907 551 M) 15:49:25 Group 001: General 880 /min Engine Speed (G28) 93.0°C Coolant Temperature (G62) 25.0 % Lambda Control Bank 1 19.5 % Lambda Control Bank 2 15:49:25 Group 033: Lambda Control 25.0 % Lambda Control Bank 1 Sensor 1 0.065 V Sensor Voltage Bank 1 Sensor 1 18.0 % Lambda Control Bank 2 Sensor 1 0.635 V Sensor Voltage Bank 2 Sensor 1 15:49:25 Group 035: Lambda Control (Lambda Sensor Aging - Bank 2 Sensor 1) 880 /min Engine Speed (G28) 330.0°C Catalytic Converter Bank 2 Temp. 0.00 s Dynamic Factor Bank 2 Sensor 1 Test OFF Result Lambda Aging -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Address 01: Engine (8D0 907 551 M) 15:53:58 Group 001: General 880 /min Engine Speed (G28) 92.0°C Coolant Temperature (G62) 0.0 % Lambda Control Bank 1 0.0 % Lambda Control Bank 2 15:53:58 Group 033: Lambda Control 0.0 % Lambda Control Bank 1 Sensor 1 0.025 V Sensor Voltage Bank 1 Sensor 1 0.0 % Lambda Control Bank 2 Sensor 1 0.035 V Sensor Voltage Bank 2 Sensor 1 15:53:58 Group 035: Lambda Control (Lambda Sensor Aging - Bank 2 Sensor 1) 880 /min Engine Speed (G28) 395.0°C Catalytic Converter Bank 2 Temp. 0.00 s Dynamic Factor Bank 2 Sensor 1 Test OFF Result Lambda Aging Title: Re: Took my first logs with the vag, need help understanding Post by: longliveaudi on October 31, 2012, 12:57:03 PM Can you close thread, i dont want someone to reply and get mad cuz i never look at this thread anymore
|