NefMoto

Technical => Flashing and Chipping => Topic started by: eazydaz on November 06, 2012, 03:17:00 PM



Title: edc15 lock ecu for reading
Post by: eazydaz on November 06, 2012, 03:17:00 PM
please,how I lock ecu for reading tune via obd? edc15 and me7.5


Title: Re: edc15 lock ecu for reading
Post by: matchew on November 06, 2012, 04:44:20 PM
EDC15 not possible


Title: Re: edc15 lock ecu for reading
Post by: eazydaz on November 07, 2012, 01:45:06 AM
and me7.5?


Title: Re: edc15 lock ecu for reading
Post by: IamwhoIam on November 07, 2012, 01:46:31 AM
EDC15 is possible but you cannot write to it anymore afterwards, only in boot mode, so you have to be sure of what you are going to write to it.


Title: Re: edc15 lock ecu for reading
Post by: eazydaz on November 07, 2012, 02:07:22 AM
EDC15 is possible but you cannot write to it anymore afterwards, only in boot mode, so you have to be sure of what you are going to write to it.

I understand,and how to do it?(I think edc15)


Title: Re: edc15 lock ecu for reading
Post by: matchew on November 07, 2012, 05:55:24 AM
EDC15 is possible but you cannot write to it anymore afterwards, only in boot mode, so you have to be sure of what you are going to write to it.

Please explain how?


Title: Re: edc15 lock ecu for reading
Post by: prj on November 07, 2012, 06:48:53 AM
I have not devoted too much time to diesel ECU's, but wasn't all the read/write functionality on EDC15 in the ROM?


Title: Re: edc15 lock ecu for reading
Post by: matchew on November 07, 2012, 07:04:16 AM
Correct, no way of stopping reading or writing with good tools.


Title: Re: edc15 lock ecu for reading
Post by: ta79pr on November 07, 2012, 07:22:34 AM
I too have an EDC15 (98 Beetle TDI/ALH). It was chipped by a pro, but I really need to tweak a few parameters due to a nasty slow down shudder. It was my understanding (based on very little) that I had to unsolder the two chips and flash new ones in a jig and solder them back in (or solder in a chip socket)...


Title: Re: edc15 lock ecu for reading
Post by: IamwhoIam on November 07, 2012, 04:58:16 PM
Correct, no way of stopping reading or writing with good tools.

Keep searching, it IS possible :)


Title: Re: edc15 lock ecu for reading
Post by: matchew on November 07, 2012, 04:59:59 PM
Keep searching, it IS possible :)

Not by changing anything in the flash file its not.