|
Title: Use VCDS with UNISETTINGS functionality Post by: masterj on November 07, 2012, 05:36:04 AM Hello, peps! :)
I don't know if everyone knows this already but there's a way to unlock full control of VCDS adaptation channels (same thing as unisettings does, but without any additional soft). So, what do we have to do? Simple ;) 1) Allow complete access without logins: CWTAF = 16383 (dec) 2) Remove soft limits for all channels: xxx_AUG to 00 and xxx_AOG to FF Controlable channels: 01.Idle speed 02.Fuel on increasing load 03.Fuel on decreasing load 04.Fuel enrichment on startup 05.Fuel enrichment on warmup 06.Lambda regulation speed 07.Speed limit 08.Secondary fuel enrichment 09.Ignition timing 10.Primary fuel enrichment 11.--- (no EGR) 12.Load scaling 13.Idle speed control bits 14.Idle torque Go and test it on VCDS or VAG-COM ;) P.S> Gonna update my me7 wizz with this info and add some additional info Title: Re: Use VCDS with UNISETTINGS functionality Post by: byzan a4 on November 10, 2012, 02:48:45 PM Good info, where am I looking to input these values?
Title: Re: Use VCDS with UNISETTINGS functionality Post by: masterj on November 10, 2012, 03:42:18 PM Good info, where am I looking to input these values? VCDS or VAGCOM: ENGINE BLOCK -> ADAPTATION ;)Title: Re: Use VCDS with UNISETTINGS functionality Post by: SurgeA4 on April 24, 2014, 10:05:51 PM Is this possible to do with vcds lite?
Title: Re: Use VCDS with UNISETTINGS functionality Post by: elRey on April 25, 2014, 07:08:39 AM Great info. Thank you.
Title: Re: Use VCDS with UNISETTINGS functionality Post by: weijie on May 05, 2014, 05:30:35 AM Doesnt wok on med9.1 :(
Title: Re: Use VCDS with UNISETTINGS functionality Post by: bk56190 on May 05, 2014, 09:31:27 AM Great post !
Could you detail which variable does each channel modify ? Title: Re: Use VCDS with UNISETTINGS functionality Post by: soul87 on December 07, 2018, 07:28:18 AM Any clue how to find CWTAF in BIN file?
|