|
Title: Audi TT immobiliser Post by: thegenius on November 14, 2012, 05:49:26 PM Hi guys,
I have a full binary read of a TT, 3.2 liter. It's still an ME7.1 I need to disable immobilizer and I've checked the other threads out and cannot find an answer. The addresses 12 and 22 are not the same obviously since it's a full chip read, but I've also found where this string of hex is and the values are not the same. Instead of the value being 1 and raising it to 2, the value I find in those bytes is 4. Any help would be greatly appreciated! Thanks! Title: Re: Audi TT immobiliser Post by: k0mpresd on November 14, 2012, 06:02:45 PM you need eeprom read. not flash.
|