NefMoto

Technical => Flashing and Chipping => Topic started by: woody on November 26, 2012, 06:58:56 AM



Title: Flashing a 8N0906018BH with 8N0906018BP file
Post by: woody on November 26, 2012, 06:58:56 AM
Can anyone tell me what the diffrence is. i have flashed my BH ecu with BP software and it works 100% as far as i can tell
both for Audi S3 BAM engine ME7.5 same year etc


Title: Re: Flashing a 8N0906018BH with 8N0906018BP file
Post by: madswp on November 26, 2012, 10:21:13 AM
Can anyone tell me what the diffrence is. i have flashed my BH ecu with BP software and it works 100% as far as i can tell
both for Audi S3 BAM engine ME7.5 same year etc


open both files in tunerpro or winols, and use the difference tool. then you can see what the changes are. you need some sort of deffinition file to find out exactly which maps and what values are changed.  there are guides on this site to do that

the files ARE different. but maybe just maps moved around. im not sure.



Title: Re: Flashing a 8N0906018BH with 8N0906018BP file
Post by: woody on November 26, 2012, 10:48:14 AM
here are both the ori files i cant seem to find a xdf for the bp file


Title: Re: Flashing a 8N0906018BH with 8N0906018BP file
Post by: madswp on November 26, 2012, 10:57:40 AM
here are both the ori files i cant seem to find a xdf for the bp file

then you have to make one  ;) please upload the original bp file to the right section (original files) and make a link instead for the future. i dont think it is listed in there.

i dont have any deffinition for the bp file either.  but there are guides in here how to make one