|
Title: Memory layout VW Polo GTI 2008, 1.8T Post by: WhiteGTI on December 05, 2012, 11:56:58 AM Hi,
i want to read my ecu but i don't know the exact memory layout. Has anybody an idea ? I've tried one but reading from ecu fail's... Is there a chance to brick the ecu while reading?! sorry for these noob questions but im really new in all these thing ;) Log: Connecting... Starting slow init connection. Connecting to address 0x01. Slow init succeeded. Switching to KWP1281 session. KWP1281 connect info: °6A906032TL 1.8l R4/5VT G 0040 Read 5 ECU info entries: 0x92, System Supplier ECU Hardware Number: 0261208950, 0x94, System Supplier ECU Software Number: 1037378104, 0x91, Vehicle Manufacturer ECU Hardware Number: 0x0D, 0xFF, 0x9B, Calibration Date: 06A906032TL , 0040, 0x00002CEC, 0x00000001, 0x3435, 1.8l R4/5VT , G , 0x9C, Calibration Equiment Software Number: 0x80030900, greetings from germany! Title: Re: Memory layout VW Polo GTI 2008, 1.8T Post by: professor on December 05, 2012, 12:05:38 PM 29F800BB
Title: Re: Memory layout VW Polo GTI 2008, 1.8T Post by: phila_dot on December 05, 2012, 12:22:47 PM 2008?
ME7? KWP? Title: Re: Memory layout VW Polo GTI 2008, 1.8T Post by: WhiteGTI on December 05, 2012, 12:36:00 PM yes me7.5 ... i am using vcds hex-can interface, is it possible to brick the ecu while reading from it?
Title: Re: Memory layout VW Polo GTI 2008, 1.8T Post by: professor on December 07, 2012, 05:30:18 AM Its against the odds but not impossible.
|