NefMoto

Technical => Tuning => Topic started by: Skibum513 on December 08, 2012, 11:34:31 PM



Title: any way to convert a .ols to a .bin
Post by: Skibum513 on December 08, 2012, 11:34:31 PM
So I just finshed putting lc and nls and makeing a few adjustments to a tune I'm working on and tried to save it as a bin. It saved as a .ols project? is there any way to save it as a .bin file or did I just waist a bunch of time.... :(
I'm currently useing the demo version of winols witch I'm thinking is the problem...


Title: Re: any way to convert a .ols to a .bin
Post by: k0mpresd on December 08, 2012, 11:57:48 PM
lol.


Title: Re: any way to convert a .ols to a .bin
Post by: ddillenger on December 09, 2012, 12:58:57 AM
In the drop down menu select project, ex-and import, export file (or just CTRL+E) and select binary.


Title: Re: any way to convert a .ols to a .bin
Post by: ddillenger on December 09, 2012, 01:00:30 AM
Just noticed the demo version comment. Upload the OLS.


Title: Re: any way to convert a .ols to a .bin
Post by: 316LV on December 09, 2012, 03:59:42 PM
Demo doesn't do export of bins. Looks like someone will help you if you upload it ^^^  ;D


Title: Re: any way to convert a .ols to a .bin
Post by: Skibum513 on December 09, 2012, 04:03:55 PM
Ok thanks ya I tried to export and it wouldn't let me click on it Here it is. It hasn't been checksumed was going to run it through the tunepro plugin and looks like I need to start using tunpro or get the full winols.


Title: Re: any way to convert a .ols to a .bin
Post by: ddillenger on December 09, 2012, 04:28:20 PM
==============================================================================
ME7Check v1.12 (c) mki, 06/2004-05/2012
Checking file C:\Documents and Settings\User1\Desktop\WinOLS (Audi TT (Original)
 - 360646).bin (size=1048576)
Reading Version Strings...
-> Bootrom Version = 05.12
-> EPK = 40/1/ME7.5/5/4019.02//24b/Dst01o/210201//
-> Contents of ECUID data table:
   - '0261207440'         (SSECUHN)
   - '1037360646'         (SSECUSN)
   - '06A906032HN '       (VAG part number)
   - '0001'               (VAG sw number)
   - '1.8L R4/5VT     '   (engine id)
-> Contents of ECUID data table:
   - 'HW_MAN004'


-> No errors found. File is OK.   *********************

Press any key to continue . . .


Title: Re: any way to convert a .ols to a .bin
Post by: Skibum513 on December 09, 2012, 04:39:59 PM
^ Thank you very much ;D


Title: Re: any way to convert a .ols to a .bin
Post by: ddillenger on December 09, 2012, 04:43:17 PM
Any time!


Title: Re: any way to convert a .ols to a .bin
Post by: balders on January 01, 2013, 04:47:16 PM
Just for information purposes, the easiest way to convert a .ols file to .bin.
Is to, simply open the file up with tunerpro and save as .bin

The trial version of winols doesn't let you extract it as a .bin file only .ols


Title: Re: any way to convert a .ols to a .bin
Post by: Lobuziak on January 02, 2013, 04:14:03 PM
The binary (one or more) sit at the end of the ols file. The easiest is to copy/paste last (or more) 1024 Kbytes(remap size) from ols file with some hex editor.