NefMoto

Technical => Flashing and Chipping => Topic started by: cocktailyogi on December 11, 2012, 02:13:14 PM



Title: Magneto Marelli 4MV - golf 4
Post by: cocktailyogi on December 11, 2012, 02:13:14 PM
hello,

I woud like to play around with my Magneto Marelli 4MV ECU. What is the best way to flash it?

036906034BH

Take out Flash or is OBD flash possible? Which tool would be the best?

Kind regards,
Yogi


Title: Re: Magneto Marelli 4MV - golf 4
Post by: vampirelo on September 18, 2014, 06:53:10 AM
Same question: does it possible to read Magneto Marelli 4mv ecu (golf 4) through ODB ?


Title: Re: Magneto Marelli 4MV - golf 4
Post by: AndreyBZ on September 19, 2014, 06:20:53 AM
Hi. I have the same ecu on my Vw mk4 1.6AZD, marelli iaw 4mv. I have Fg-Tech galleto flasher 3 and won't read it


Title: Re: Magneto Marelli 4MV - golf 4
Post by: panos1975 on September 19, 2014, 10:03:45 AM
the best and safest way for these ecus to read and write is desoldering and programmer.although there are some tools like kess,byteshooter,genious,magpro,etc...i think could do them via obd(i haven't tried them).


Title: Re: Magneto Marelli 4MV - golf 4
Post by: terminator on September 19, 2014, 12:16:22 PM
Read it with FGtach. It takes 30 min for reading and 2 min for writing.


Title: Re: Magneto Marelli 4MV - golf 4
Post by: vampirelo on January 27, 2015, 06:11:57 AM
I am still not able to find cable ans sw to read ecu 036 906 034 DR MARELLI 4MV.  :( :( :(
Could you please advise if Bosh ECU available for BCB engine Golf IV which can be installed instead of unreadable Marelli?  ???
 


Title: Re: Magneto Marelli 4MV - golf 4
Post by: fknbrkn on January 27, 2015, 06:16:04 AM
свапай уже на нормальный мотор, нехуй там делать в этом всв


Title: Re: Magneto Marelli 4MV - golf 4
Post by: vampirelo on January 27, 2015, 07:15:09 AM
свапай уже на нормальный мотор, нехуй там делать в этом всв
Оценил!  ;D


Title: Re: Magneto Marelli 4MV - golf 4
Post by: TCSTigersClaw on January 28, 2015, 03:30:38 AM
4MV is readable with Fgtech original and Genius via OBD . On the bench you have to deactivate IMMO (or short it ) to work.

Read is Full , write is not . Becareful for swap lines and  I would also recomend to desolder :)


Title: Re: Magneto Marelli 4MV - golf 4
Post by: chester_sk8 on November 05, 2015, 01:40:56 AM
Hi, all.
What about Magneti Marelli 4LV?