|
Title: reflashing your atmega 162 cable Post by: k0mpresd on January 08, 2013, 09:27:08 PM i found these diagrams useful so maybe someone else will as well.
i will not post or link dumps. it took me about a full day to sort it all out. next day, reflashed a cable in about 5 minutes start to finish. i soldered to the canbus controller because like the picture says, its easier. you do not need to attach 12v/ground to the regulator, just plug obd2 connector to power source. on the bench this is easy. also plug usb to pc. ponyprog: http://downloads.sourceforge.net/ponyprog/PonyProg_V207c.zip (http://i795.photobucket.com/albums/yy231/k0mpresd/2ele0k7.jpg) (http://i795.photobucket.com/albums/yy231/k0mpresd/2j35rhf.jpg) (http://i795.photobucket.com/albums/yy231/k0mpresd/25ezf55.jpg) (http://i795.photobucket.com/albums/yy231/k0mpresd/ConfigurationAndSecurityBits.jpg) 5 minute homemade cable. worked great. (http://i795.photobucket.com/albums/yy231/k0mpresd/photo-11.jpg) |