|
Title: 8E0909518BC please help Post by: 4u2nv144 on January 22, 2013, 04:11:41 PM Ok new to this forum need some help ,took 2005 B7 1.8T to get aircon regas, guy bridged B+ to compressor wire and now my DBW doesnt work...found processor chip burnt inside the ECU :o , car starts but doesnt rev up.So now need to do a ecu swap.I have a 8E0909518AK ecu but I want to flash BEX file to AKbox so car will be 190hp and desolder 95040 eeprom from BCbox and solder it too AKbox so that my immo3 will work... any ideas about this theory ???
Title: Re: 8E0909518BC please help Post by: ddillenger on January 22, 2013, 04:26:15 PM There is no need to desolder the 95040, just use argdubs tool and read it off, then write it to the new ecu in bootmode.
And maybe you mean b6? Title: Re: 8E0909518BC please help Post by: 4u2nv144 on January 22, 2013, 04:30:01 PM nope the car is a B7 1.8T 163hp
Title: Re: 8E0909518BC please help Post by: 4u2nv144 on January 22, 2013, 04:31:10 PM Thanks alot will give it a try :)
Title: Re: 8E0909518BC please help Post by: 4u2nv144 on January 22, 2013, 05:01:22 PM One more question can any1 help me with is ecu map thats attached found it on this forum was wondering if it is a BEX 190hp file for audi 1.8t ???
|