|
Title: Immo defeat 8D0 907 558T Post by: DavidW on February 07, 2013, 09:24:14 AM Hi guys,
I'm a newbie on here and hoping someone could help me out. I'd like to understand how to remove the immobilizer on this ecu. Which bytes do I need to change and to what? Title: Re: Immo defeat 8D0 907 558T Post by: 316LV on February 07, 2013, 03:38:44 PM Let me preface by saying I've never modified a 95040 dump... Too easy to just flash one of the many immo off bins from the forum.
That said, the following post by SeRiLLo should answer your question: http://nefariousmotorsports.com/forum/index.php?topic=1629.msg16090#msg16090 Good luck! Title: Re: Immo defeat 8D0 907 558T Post by: DavidW on February 07, 2013, 04:36:28 PM Thank you for your reply,
As far as I can tell this is a M3.8.2 ecu and I desoldered the eeprom and read the dump as a 24c02, I already have what is supposed to be a immo off dump but not had chance to try it. I was really hoping for a chance to learn more about what bytes do what and if they are the same bytes as those that are listed for ME7 ecus. Thanks |