NefMoto

Technical => Reverse Engineering => Topic started by: Normohl on February 07, 2013, 04:17:03 PM



Title: adding nls and antilag lc.
Post by: Normohl on February 07, 2013, 04:17:03 PM
trying to implement the nls and aintlag code into my tune, I have changed all the variables listed on the wiki until it gets to the part where it tells you to add the code to the empty space 0x8E800 to 0x8E88D but when I go to hex edit it in it goes from 0x8E800 to 0x8E91C so its a little longer than it should be? What am I doing wrong here?

9A2B1380F2F4408ED7008100F2F9007E40499D0BF2F47AF8D7008100F2F9027E4049FD03F78EAC8D0D2F9A2B29808A2B2260F2F47AF8D7008100F2F9067E4049FD1AC2F4028BD7008100C2F9087E4049FD12D7003800F2F4F04FD7008100F2F9047E40499D11F78EAC8D0841D7003800F7F8F04F0D09D7003800F68FF04F0D04D7003800F68EF04FF3F8F38ADB00

http://www.nefariousmotorsports.com/wiki/index.php/Adding_anti-lag_launch_control_and_no-lift_shift



Title: Re: adding nls and antilag lc.
Post by: Normohl on February 07, 2013, 04:36:23 PM
Okay ended up using HXD hex editor and it turned out right, is there a problem with the hex editor in tuner pro?