|
Title: ME 7.1 "G" <--?? Post by: cyril279 on February 14, 2013, 07:48:44 AM Reading my ECM (http://nefariousmotorsports.com/forum/index.php?topic=3127.msg31196#msg31196) with VCDS:
Address 01: Engine Labels: 021-906-018-AFP.lbl Part No: 021 906 018 M Component: MOTRONIC ME7.1 G V04 Coding: 00031 Reading the same ECM with ME7check: ============================================================================== me7check v1.12 (c) mki, 06/2004-05/2012 Checking file C:\...\021906018m_v04_00031.bin (size=524288) Reading Version Strings... -> Bootrom Version = embedded in CPU, asume 05.12/05.32 -> EPK = 44/1/ME7.1/120/6228.A5//F19lm/Dstm4g/190599/ -> Contents of ECUID data table: - '0261206486' (SSECUHN) - '1037352315' (SSECUSN) - '021906018M ' (VAG part number) - 'V04 ' (VAG sw number) - ' MOTRONIC ME7.1 ' (engine id) -> Contents of ECUID data table: - 'HW_MAN004' -> No errors found. File is OK. ********************* examining the file into a hex editor, looking specifically at lines "1_430x" & "1_56Cx" shows the ECM identification info, but without any "G" anywhere nearby. The G can be found in more that just this version, Any ideas where the G is derived from? or why VCDS cares? ------------------------------------------------------------------------------- Address 01: Engine Labels: 021-906-018-AFP.lbl Part No: 021 906 018 M Component: MOTRONIC ME7.1 G 6760 Coding: 00031 ------------------------------------------------------------------------------- Address 01: Engine Labels: 021-906-018-AFP.lbl Part No: 021 906 018 M Component: MOTRONIC ME7.1 G V006 Coding: 00031 ------------------------------------------------------------------------------- Address 01: Engine Labels: 021-906-018-AFP.lbl Part No: 021 906 018 T Component: MOTRONIC ME7.1 G 0003 Coding: 00031 Title: Re: ME 7.1 "G" <--?? Post by: phila_dot on February 14, 2013, 07:57:13 AM G means cruise control equipped
Title: Re: ME 7.1 "G" <--?? Post by: cyril279 on February 14, 2013, 08:26:33 AM ah. thanks phila_dot.
...and now I see that on this ross-tech article (http://www.ross-tech.com/vag-com/cars/vwmkIV.html#01) as well. I ask because I recently flashed an image onto an ecm and suddenly there was an asterix before the G (*G) maybe it's deactivated in the new flash? or maybe not fully adapted yet? I'll have to go back and check all coding elements. |