|
Title: Erase Bosch ME 7.0 ECU Post by: ivorcam on January 06, 2011, 06:53:29 AM Hello
I am new to this forum and i will be very pleased if somebody can help me with this issue. I have a secondhand ECU and I want to use it in my car. I went to the stealer and they informed me that they cannot owerwrite the data in a secondhand ECU. It has something to do with the immobilizer code. Is it possible to erase/flash all the informations stored so that the box is "empty" and can be reflashed? And what tool can be used. I am thinking about Galetto or KWP 2000. The ECU is a Bosch ME7 part no.0261206828. Thank you in advance Title: Re: Erase Bosch ME 7.0 ECU Post by: carlossus on January 06, 2011, 07:04:41 AM A few of us are doing this at the moment, you should check this thread...
http://www.nefariousmotorsports.com/forum/index.php?topic=300.0title= -C Title: Re: Erase Bosch ME 7.0 ECU Post by: pvl on February 01, 2011, 03:21:10 PM Hi,
I think that is possible. But we need to get things straight as of for what car this ecu is meanth. Your ecunumber (0261206828) seems a number for a volvo. Is this correct ? Ifso, what volvo would you like it to be for ? And what's now the software in it ? (for which volvo was it originally programmed). I have such a ecu laying about, but messed up the flashrom, sadly. Perhaps we can both help eachother out a bit. What kinda tools do you have already to read-out ? There are tools that do these boxes (flashrom) via K-line. Hope to hear from you soon, Cheers, PvL Title: Re: Erase Bosch ME 7.0 ECU Post by: ivorcam on February 05, 2011, 06:19:09 AM Thanks for your reply.
Yes it is a Volvo ECU. My car is a V70 2001 B5244T3. I got a spare ECU from a breaker to have it remapped in Sweden. The spare has been taken from a T5 (B5234T3). I do not have any flash tools yet as this is what i am also looking for and i will only do it whith the ECU removed from the car. It seems that all the information around is only for VAG cars. Cheers Michael Quote I think that is possible. But we need to get things straight as of for what car this ecu is meanth. Your ecunumber (0261206828) seems a number for a volvo. Is this correct ? Ifso, what volvo would you like it to be for ? And what's now the software in it ? (for which volvo was it originally programmed). I have such a ecu laying about, but messed up the flashrom, sadly. Perhaps we can both help eachother out a bit. What kinda tools do you have already to read-out ? There are tools that do these boxes (flashrom) via K-line. Hope to hear from you soon, Cheers, PvL Title: Re: Erase Bosch ME 7.0 ECU Post by: adam12112 on May 21, 2011, 03:14:38 AM Hi,
I have the same question for bosch 0261206828 from volvo, ivorcam are you find solutions how make virgin this unit ? Can I read/write this ECU using Nefmoto software with vag cable? Regards Title: Re: Erase Bosch ME 7.0 ECU Post by: DJGonzo on May 21, 2011, 06:32:35 AM Only way to flash Volvo ECU's is to do boot mode.
Title: Re: Erase Bosch ME 7.0 ECU Post by: adam12112 on May 21, 2011, 02:12:52 PM What tool can i use?
Title: Re: Erase Bosch ME 7.0 ECU Post by: Dilemma on August 02, 2011, 07:43:41 AM Volvo ME7 flashing is possible through canbus.
Title: Re: Erase Bosch ME 7.0 ECU Post by: Yorl on April 10, 2012, 11:48:49 AM How would you flash through canbus?? Interested in this...
Title: Re: Erase Bosch ME 7.0 ECU Post by: diagnosticator on November 03, 2012, 07:47:58 AM In order to flash via CAN buss, the ECU must be CAN diagnosics capable. Otherwise, the flash is via K line. CAN diagnostics was not implimented prior to MY 2004 AFAIK.
|