|
Title: Sound-belt Post by: AWAS on March 05, 2013, 10:57:57 AM Can I turn on seat belt alarm in motion, as in new cars?
Dashboard: 3B0 920 847. (Passat b5.5) Dump panel is. Title: Re: Sound-belt Post by: cerips on March 05, 2013, 01:56:25 PM If it's the same or similar to the B5 A4 you can adapt the cluster to do it.
http://www.ross-tech.com/vag-com/cars/audiB5.html Title: Re: Sound-belt Post by: AWAS on March 06, 2013, 03:51:18 AM Let me explain what I would like to achieve.
Normally, security belt works like this: the belt is not inserted in the ignition panel beeps 6 times. Further alarm no no. I would like to control belt breakdowns sound when the vehicle is in the new car. Title: Re: Sound-belt Post by: AWAS on March 06, 2013, 10:57:27 AM Here modes belts in modern cars for example Audi A3 (8P):
C10, xxx? X: Seat Belt Warning C11, 0 - No Seat Belt Warning C12, 1 = Europe-NCAP (permanent visual warning and acoustic warning active for 91 seconds) C13, 2 = USA and Canada OLD (visual and acoustic warning for 6 seconds) C14, 3 = USA and Canada NAR-NEW (permanent visual warning and acoustic warning active every 30 seconds) C15, 4 = Europe-NCAP (including passenger - permanent visual warning and acoustic warning active for 91 seconds) C16, 5 = USA and Canada OLD (including passenger - visual and acoustic warning for 6 seconds) C17, 6 = USA and Canada NAR-NEW (including passenger - permanent visual warning and acoustic warning active every 30 seconds) Passat 3B only in modes 0 and 2. The question is whether to include three or more modes? Title: Re: Sound-belt Post by: graeme86 on April 16, 2013, 05:37:50 AM It will not work in your 3B0920847 cluster :(
You need a cluster with later software. |