|
Title: KRKTE and TVUB about factor Post by: grey on March 06, 2013, 04:56:42 PM Hi Guys,
I have doubts about factor KRKTE and TVUB.I know map address but I'm not sure for factor. The car stock injector number is 0 280 156 065 / 06B 133 551M and using 4 Bar FPR KRKTE 0x1DF8C TVUB 0x15C74 What are your ideas for right factor? Thanks in advance for your help.. 4B0906018DH/0261207928/366497/8E0909018A Ori file is attached Title: Re: KRKTE and TVUB about factor Post by: grey on March 07, 2013, 01:28:49 PM Any think ?
Title: Re: KRKTE and TVUB about factor Post by: ddillenger on March 07, 2013, 01:34:33 PM KRKTE .000167*x
KVB 3.046875 * x TVUB 0.002667*x That should be right. Title: Re: KRKTE and TVUB about factor Post by: grey on March 07, 2013, 01:55:08 PM KRKTE .000167*x TVUB 3.046875 * x This may not be right btw. .000167 (http://b1303.hizliresim.com/17/7/kuny8.jpg) (http://bit.ly/c25MCx) Thanks. KRKTE maybe right but TVUB ? Title: Re: KRKTE and TVUB about factor Post by: ddillenger on March 07, 2013, 03:23:50 PM Let me take a look shortly. I'll post later.
Title: Re: KRKTE and TVUB about factor Post by: ddillenger on March 07, 2013, 08:14:42 PM Fixed my original post. I initially thought you meant KVB.
Title: Re: KRKTE and TVUB about factor Post by: grey on March 08, 2013, 01:43:19 AM Fixed my original post. I initially thought you meant KVB. Thanks for information :) Regards Title: Re: KRKTE and TVUB about factor Post by: grey on March 23, 2013, 01:48:42 PM tvub .002667
Is it a little strange? (http://b1303.hizliresim.com/17/r/ld415.jpg) (http://bit.ly/c25MCx) Title: Re: KRKTE and TVUB about factor Post by: Bische on April 02, 2013, 03:15:50 AM .0039945
For TEMIN/VA, TVUB and TVTSPEV etc. Title: Re: KRKTE and TVUB about factor Post by: grey on April 02, 2013, 03:26:26 AM .0039945 For TEMIN/VA, TVUB and TVTSPEV etc. Thank you, this should help me a lot :) Title: Re: KRKTE and TVUB about factor Post by: aef on February 12, 2014, 11:46:35 PM So it is 0.0039945 for TVUB not 0.002667 ?
I created a xdf file using prj's maplocator tool and its 0,002667 within the xdf and some other definition files Title: Re: KRKTE and TVUB about factor Post by: grey on February 16, 2014, 12:09:19 PM So it is 0.0039945 for TVUB not 0.002667 ? I created a xdf file using prj's maplocator tool and its 0,002667 within the xdf and some other definition files .002667 is wrong for TVUB Title: Re: KRKTE and TVUB about factor Post by: aef on February 17, 2014, 02:27:31 PM >:(
what is your advice? Title: Re: KRKTE and TVUB about factor Post by: maZer.GTi on February 17, 2014, 02:55:40 PM Hi Guys, I have doubts about factor KRKTE and TVUB.I know map address but I'm not sure for factor. The car stock injector number is 0 280 156 065 / 06B 133 551M and using 4 Bar FPR KRKTE 0x1DF8C TVUB 0x15C74 What are your ideas for right factor? Thanks in advance for your help.. 4B0906018DH/0261207928/366497/8E0909018A Ori file is attached Just a small trick to check the factors, create .ecu definition file with me7 logger and compare to the factors inside. greets :) Title: Re: KRKTE and TVUB about factor Post by: grey on February 17, 2014, 04:33:52 PM Just a small trick to check the factors, create .ecu definition file with me7 logger and compare to the factors inside. greets :) Thanks for great hint ! TEMIN factor should be 0.004 according to this data. Am i wrong? How do I find factor TVUB and KRKTE in this file? Title: Re: KRKTE and TVUB about factor Post by: grey on February 17, 2014, 05:18:31 PM # Mapping for standard ME7.5/ME7.1
# # Version 1.20, (c) mki 09/2011 # # # Normally you should not need to edit this file!! # # Remark: the conversion factor of injection timing variables te_w, te2_w, ti_b1, ti_b2, ti_avg, timx_w, timxth_w # varies between different ecu's. The conversion of injection time internal value -> physical value depends # on the ecu's cpu speed: # 20 MHz -> factor = (1/312.5) = 0.0032 (3.2us/TickTime) # 24 MHz -> factor = (1/375) = 0.00266667 (2.667us/TickTime) # 32 MHz -> factor = (1/250) = 0.0040 (4us/TickTime) (*) # 40 MHz -> factor = (1/312.5) = 0.0032 (3.2us/TickTime) (*) # (*) 32MHz and 40MHz use doubled divide factor for timer T4 compared to 20MHz and 24MHz. # In this map file, the conversion factors for 24MHz are inserted as default. # The ME7Info tool will automatically determine the used cpu speed and put the # correct conversion factors into generated ecu characteristics files! # -> Changed conversion factors for injection timing variables in this file will not be effective. # # In addition, the conversion factor of following constants is also dependent on cpu frequency: # TEMIN, TEMINVA, TVUB, TVTSPEP, DTEPRU, DTIABS : same factor as for injection timing variables # KRKTE : factor of inj. timing variables divided by 24 I think I understand better now.Thanks to all :) Title: Re: KRKTE and TVUB about factor Post by: sonique on February 18, 2014, 04:55:20 PM maybe older version motronic TVUB factor ??
and ols file maybe injector constant krkte ?!?! or maybe not correct how to find ? i some tuned programs compare and not find different TVUB but i found few 1x1 map different sorry bad english :( |