|
Title: Will an A4 Jetta 1.8t have the ECU connector neede to bench flash a 2.7t ECU? Post by: haygood on March 09, 2013, 11:49:34 AM ?
Title: Re: Will an A4 Jetta 1.8t have the ECU connector neede to bench flash a 2.7t ECU? Post by: ddillenger on March 09, 2013, 12:01:10 PM me7.5/7.1/7.1.1 all share an ecu connector, however the large plug (the one you'll use for bench flashing) has a different key. You can modify the plug (super easy) or snap the key off the ecu. (picture shown)
(http://i47.tinypic.com/2a9wbqx.jpg) s4's/2000MY a6's/non immobilizer equipped me7.5 vehicles all use the bottom plug. Newer immo equipped cars use the top style. Plug is the same, but note the small key inside. In short, you can use the plug with slight modifications to make it fit the style key you have in your ecu. Title: Re: Will an A4 Jetta 1.8t have the ECU connector neede to bench flash a 2.7t ECU? Post by: haygood on March 09, 2013, 06:07:39 PM Thanks!
|