|
Title: audi tt ecu zapped Post by: player on March 17, 2013, 05:12:39 AM hy.
my audi tt 1.8 ajq 180 hp ecu 8n0 906 018 a is zapped... will 4B0 906 018 DN work on my car with immo off? thanx. Title: Re: audi tt ecu zapped Post by: vdubnation on March 17, 2013, 08:28:57 AM i dont think it will work check out this link with the ecu groups
www.nefariousmotorsports.com/forum/index.php?topic=267.0 Title: Re: audi tt ecu zapped Post by: vagenwerk on March 17, 2013, 12:15:14 PM http://nefariousmotorsports.com/forum/index.php?topic=1511.0
this ecu you want to buy is wideband, o2 sensor , maf doesn't match to your ajq componets. you could run on it with immo off , but you have to change maf to new type and change lambda sensor to wideband (5 wires). Title: Re: audi tt ecu zapped Post by: ddillenger on March 17, 2013, 12:16:31 PM That, and disable vvt and egt if your car doesn't have those features.
Title: Re: audi tt ecu zapped Post by: aef on March 18, 2013, 04:11:52 AM hy. my audi tt 1.8 ajq 180 hp ecu 8n0 906 018 a is zapped... will 4B0 906 018 DN work on my car with immo off? thanx. Are you sure your CAR is AJQ with ..018 without char behind? Title: Re: audi tt ecu zapped Post by: vagenwerk on March 18, 2013, 11:57:05 AM Are you sure your CAR is AJQ with ..018 without char behind? 8n0 906 018 a Title: Re: audi tt ecu zapped Post by: player on March 18, 2013, 02:27:07 PM so...if i run immo defeat...the car should start...in limp mode but the engine will 100% run right?
Title: Re: audi tt ecu zapped Post by: player on March 18, 2013, 02:32:05 PM another thing...if i change the flash from 29f800 to 29f400 ?and load my 8n0906108 512kb flashh on it?will i be able to use only the "hardware " from it and the software from my original 29f400?
|