|
Title: APR chipped ecu softcoding chang, Post by: ddillenger on March 27, 2013, 11:32:38 PM So I have this APR ecu, it's the bane of my existence. I bought it to flash, only to find it had an APR soldered in emcs board. I figured fine, I'll sell itas it is. Defeated the immobilizer, sold it. ECU starts, runs, etc, but has a p1612. Softcoding is 07752, car it's installed in is an allroad, which requires 07755. Softcoding changes don't stick. Has anyone heard of needing to login or enter the wsc in order to recode one of these? Any experience?
Ecu in question is 4z7907551aa (allroad ecu, should have COME with softcoding of 07755, so recoding back to this value shouldn't be an issue). Title: Re: APR chipped ecu softcoding chang, Post by: jiggle on March 28, 2013, 04:29:46 PM can you change the softcoding in the eprom and write it back with me7_95040 in bootmode?
Title: Re: APR chipped ecu softcoding chang, Post by: ddillenger on March 28, 2013, 04:32:23 PM When I get it back I'm going to get to the bottom of it, including attempting to hijack the eeprom. Problem is, I have to get it back first :(
|