NefMoto

What is the best tool for bootmode flashing ?  The MPPS or galetto . Can the MPSS work with nefmoto for read and write too?

I asked the same question and the advice was mpps. I ordered it from ebay, turned up really quick, and saved me tons of headaches. I have a euro car with immo3, mpps can read and write to it over obd with no troubles at all. I even flashed a file with a bad checksum and mpps got me out of trouble. You can correct checksums with the software too. Im happy with the cable and software, I think its a good buy.

You cant use the mpps cable with nefmoto, but you dont need to as they both do the same thing

Thanks what version of mpps as there seems to be a few floating round ebay

I went with a v12, I chose the lead only version rather than the one with the box. It arrived really quick to.

Get whatever version you want, faster is better. I can upload v13 of the software.

Will it work with my cable? I have no idea what changes between versions, upload it if you can and Il try it. Thank you

Here you are.

V13.2 and V12 are the exact same hardware and the actual software version for V13.2 says 12, so I don't even know why the Chinese suppliers bothered to increment the version.

Is there any way of telling which software version you are running? Any differences to spot? Thanks for all your help guys

can mpps read/write over obd or is it like galetto and bootmode only ? 

Read/write over OBD. 30 second revision flashes as well.

Cool , just ordered V12 mpps . Hopefully no more issues with flashing .   

Really?? My v12 takes the full 10 minutes every time to write the rs6 ecu. 30 seconds sounds much more appealing!

lol-

I write the M-box in around 27 seconds (assuming it already has an m-box flash on it). 10 minutes sounds awful. Have you tried the v13 software yet? Should work with your cable.

lol indeed :)

That's 30 seconds in car yeah? You change the write speed in the gui for that??? I know i've got a 1mb flash, but that's quite a difference.

I too have a 1MB flash. 30 seconds via OBD. No changes in the program. It just skips matching sectors (I assume based on the checksums) and only writes new data.

Aha, this could be the key as MPPS wont calculate the checksum for the rs6 ecu. Maybe this is why it has to write the whole file.... I'll fire up the v13 software to check too, but i think v13 is really just rebadged v12. of course my v12 could just be rebadged v5 though :D

Does MPPS work with the generic ebay odb cables like nefmoto does?

1. It will calculate the checksum fine.
2. Write the RS6 ECU as a RS4 with ME7.1 protocol and it will only write the changed blocks.

HTH.

Anybody?? Is it working with blue kkl ftdi 32rl?

No.

Hi,

Can i use MPPS cable v13 with VCDS software v15.

I have error message : don't find interface usb...

Somebody has a solution ?

Thanks

Apologies if this is a stupid question, but can MPPS read SKC from an ECU over OBD or can it only access the "Map" portion of the ECU and not the immobiliser area?

Its only the map area (flash)

Thanks