|
Title: Dumping tuned file Post by: karrann on April 21, 2013, 10:15:46 PM So I just bought a new s4 with Giac flashed on there. My old one had the N.VR stage 2 flashed on it and I really liked it. My question is Can i just open up nefmoto and load the firmware to my laptop and then flash it with a different tune? I'd like to save the Giac for future just incase in my computer.
Title: Re: Dumping tuned file Post by: catbed on April 22, 2013, 05:17:00 AM So I just bought a new s4 with Giac flashed on there. My old one had the N.VR stage 2 flashed on it and I really liked it. My question is Can i just open up nefmoto and load the firmware to my laptop and then flash it with a different tune? I'd like to save the Giac for future just incase in my computer. Get a new ECU. Giac uses a socket and another chip. And you're better off starting from scratch, not from the Giac tune. Title: Re: Dumping tuned file Post by: karrann on April 22, 2013, 02:57:43 PM Dam, you can't write over Giac? That blows!
Title: Re: Dumping tuned file Post by: ddillenger on April 22, 2013, 03:05:41 PM Dam, you can't write over Giac? That blows! Yes you can. Only the older GIAC that used the soldered in chips with encryption boards that required removal and soldering to write. The newer flashes can be written over if you disregard the memory layout warning in nefmoto. Just open the ecu. If it looks stock, feel free to overwrite it. If it has an encryption board (very obvious), then sell the ecu (or pay someone to remove the old chip and install a stocker). Title: Re: Dumping tuned file Post by: karrann on April 22, 2013, 03:14:46 PM Oh okay. I believe its the newer kind. I read the flash off it and was able to back it up but then when i tired flashing it it was giving me a warning and said flash failed and then i pressed canceled.
Title: Re: Dumping tuned file Post by: ddillenger on April 22, 2013, 03:24:36 PM Open the ecu, take a picture.
Also, get a screenshot of the error. When flashing over GIAC files it's customary to get a warning about the memory layout not being validated. It asks if you want to continue. If you hit NO, the flash fails. If you hit YES, it works. This only matters IF you have a flash. Nefmoto cannot write if the ecu is socketed with an encryption board. Title: Re: Dumping tuned file Post by: karrann on April 22, 2013, 03:29:53 PM Alright. I'll take a picture in a moment and sent it but last time i saw it which was yesterday it just looked like a normal ecu to me.
Title: Re: Dumping tuned file Post by: ddillenger on April 22, 2013, 03:31:01 PM Did you open the case?
Title: Re: Dumping tuned file Post by: karrann on April 22, 2013, 03:35:27 PM Yes. Yesterday I gutted my downpipes and did timing belt so I took out the ecu before I started that processes. I opened the black box and disconnected the ecu it just looked like a stock a box ecu from the outside. just a aluminum box.
Title: Re: Dumping tuned file Post by: ddillenger on April 22, 2013, 03:40:40 PM So you didn't open the case then (the aluminum box).
Title: Re: Dumping tuned file Post by: karrann on April 22, 2013, 03:45:32 PM no I didn't. What if i just try to flash it with stock? Will it just fail if its the older one or will it mess anything up?
Title: Re: Dumping tuned file Post by: prj on April 22, 2013, 03:54:50 PM Just open the box, there are four T15 screws which are quickly removed.
Take a look at the top of the board, snap a pic and post it up. Title: Re: Dumping tuned file Post by: karrann on April 22, 2013, 03:57:41 PM Alright, i'll do that later tonight.
Title: Re: Dumping tuned file Post by: karrann on April 25, 2013, 07:14:21 PM Ok So i took out the box and opened it and took some pictures. It had MTM written on it but I was told it is a GIAC chip. But here are the pictures if you guys can help me out
http://db.tt/H8ua2fEG http://db.tt/taFfzrM8 http://db.tt/Qps38tw6 http://db.tt/0PhGsS5S http://db.tt/lIzzqKQE Title: Re: Dumping tuned file Post by: karrann on April 25, 2013, 08:41:03 PM Also this is the error I get while trying to flash a stock file with emmisions deleted.
http://db.tt/jsYsPGCD Title: Re: Dumping tuned file Post by: matchew on April 25, 2013, 09:30:52 PM Its never going to flash to stock, Unless you solder a chip directly to the board.
Title: Re: Dumping tuned file Post by: ddillenger on April 25, 2013, 11:39:07 PM yes, you have an encryption board. No way to just flash it back to stock.
Title: Re: Dumping tuned file Post by: karrann on April 26, 2013, 07:12:06 AM Yay.. time to buy a new ecu. Thanks your your help though.
|