|
Title: ME 3.8.3 Write Post by: S3GP on April 23, 2013, 12:07:42 PM Hi all
I need help, have a customer with an old Golf4 18T. I need to write a file to the ecu, file I have, but can’t write the file? The ECU is 0261 206 517 Bosch ME3.8.3. I have Mpps, and chose golf 4 18t ME5.9.2 Connected bench wires to ECU 12V – Pin 1,3,43 Ground – Pin 2 K line Pin 19 Connected bench wires to MPPS Pin 16 – 12V Pin 4 – Ground Pin 7 – K Line With Mpps if I want to write it waking ecu, then ecu not found? If I connect Vag com cable and open Nefmoto, I can connect to ecu, choose 29B200, Can’t write either? Any suggestions are welcome. Thanks S3 Title: Re: ME 3.8.3 Write Post by: @lq! on April 24, 2013, 02:28:06 AM did you see 12v+ on voltage label? Also it looks might boot wires connections problem.
when you complete connections for all wires, you can write m3.8.3 ecu via mpps. also which mpps version did you used ? Title: Re: ME 3.8.3 Write Post by: S3GP on April 25, 2013, 08:31:54 AM MPPS V12.
Can conect to ecu with VAG and nefmoto , but cant write, but not with MPPS? |