NefMoto

Technical => Tuning => Topic started by: olo on April 24, 2013, 07:03:43 AM



Title: AEB head on AMK block
Post by: olo on April 24, 2013, 07:03:43 AM
Hello

I've installed AEB large port head on AMK block. Car is stock S3.
Now i have 10% less power and about 100C higher EGT.

Timing crank-cams checking twice, and is ok.

What maps should I modify?

Thanks!


Title: Re: AEB head on AMK block
Post by: vdubnation on April 24, 2013, 07:08:24 AM
log the car with what you have now and post it up get a better picture of things


Title: Re: AEB head on AMK block
Post by: olo on April 24, 2013, 07:40:15 AM
logs before and after head change:


Title: Re: AEB head on AMK block
Post by: olo on April 27, 2013, 04:39:28 AM
After doing some test I found: the answer is KFZW/2.

Added 6deg advanced timing,  EGT reduced about 100, and power is back.

So another question, how can I find corrected values KFZW without having a dyno?


Title: Re: AEB head on AMK block
Post by: littco on April 27, 2013, 10:19:02 AM
After doing some test I found: the answer is KFZW/2.

Added 6deg advanced timing,  EGT reduced about 100, and power is back.

So another question, how can I find corrected values KFZW without having a dyno?

Drive and log the car, and monitor cf values, trying to get them to around 1-3 will be a good starting point.