NefMoto

Technical => Cluster and Immobilizer => Topic started by: OrBy on May 26, 2013, 05:32:34 PM



Title: VW Golf MK4.5 (BEV/06A906032RF/ME7.1.1) Immo 3 OFF help?
Post by: OrBy on May 26, 2013, 05:32:34 PM
Got a bit of a project on the go here. This is only the early steps so here goes nothing.
Can anyone point be in the direction to disable the IMMO 3 on this 95160 dump?
Also if I am also right the SKC for it should be 02199 correct?


Title: Re: VW Golf MK4.5 (BEV/06A906032RF/ME7.1.1) Immo 3 OFF help?
Post by: ddillenger on May 26, 2013, 05:41:04 PM
Got a bit of a project on the go here. This is only the early steps so here goes nothing.
Can anyone point be in the direction to disable the IMMO 3 on this 95160 dump?
Also if I am also right the SKC for it should be 02199 correct?

Immo off is in the same place it always is.

12 and 22, checksums at 1E and 2E.

This file should be immo-OFF with correct sums.


Title: Re: VW Golf MK4.5 (BEV/06A906032RF/ME7.1.1) Immo 3 OFF help?
Post by: Carsinc on July 02, 2013, 10:15:35 PM
Immo off is in the same place it always is.

12 and 22, checksums at 1E and 2E.

This file should be immo-OFF with correct sums.

So If I was turning the Immo of on a R32 with a gaic tune I would just do this right? I used one of the universal files and giac
kills it. I flashed it stock and it runs fine I'm just trying to get my tune back now. ;D I've done the 95040 files a couple times
now that always works fine I've never messed with Gaic before.