|
Title: MPPS ver 18 Post by: arson-panda on June 03, 2013, 11:40:24 AM Completely new rewritten software along with the following updates, any unit will require a code to update, genuine versions only and new modules to buy available, just thought I'd share;
Added Fiat/Alfa MJD 8XX R\W\Ck (Read is OBD Read not virtual) Fiat/Alfa MJD 6FX Added OBD Read and check. Fiat 5SF 8/9 Added OBD Read Fiat 5FS 3 Added OBD Read (About 20 Mins) Ford Fiesta Siemens 206 R\W\Ck Iveco EDC16C39 R\W\Ck Also other small updates. There are also 2 new Modules. MultiBoot for Fiat\Opel MJD 6XX (Full read write Micro, Ext Eprom and Eprom) Kline and Can Bosch ME7.9.10 OBD READ This is true OBD on the car or on the bench. All the new MJD 8XX Kline and Can (Full read write Micro and EEprom) This will allow you to clone an ecu without opening it. Tricore Boot. This is ongoing so there will be quite a lot of updates for this module. There is no need for new Hardware. Though you will have to make up some cables until I can get them done. Title: Re: MPPS ver 18 Post by: prj on June 03, 2013, 12:25:11 PM Are you copy pasting this or are you actually working on the tool?
Tricore boot is great news. If this works properly, then I will buy the master right off the bat. Title: Re: MPPS ver 18 Post by: arson-panda on June 03, 2013, 01:03:20 PM Are you copy pasting this or are you actually working on the tool? Tricore boot is great news. If this works properly, then I will buy the master right off the bat. Phil makes the tool, I have helped in the past with bits where I can, when it started we did lots together mainly me testing, Phil is a very very clever guy, I'm a tuner 99% of the time. Anyone interested can mail me on my other email address john@amtcartech.com ;) or my usual j.robins@dnatuning.com Title: Re: MPPS ver 18 Post by: prj on June 03, 2013, 02:00:28 PM Figured you might be affiliated with this, but thanks for the info :)
Title: Re: MPPS ver 18 Post by: overspeed on June 04, 2013, 09:36:21 AM Will finally work with Tprot MEDC17 ?
|