|
Title: correct ESKONF adress? Post by: player on June 04, 2013, 07:41:02 AM hy.i coded out 112 , n80 and second lambda...is this the correct adress for eskonf?i edited it(10c54) from 48 to 240.
bosch me 7.5 06a 906 032 HN wideband thanks! Title: Re: correct ESKONF adress? Post by: oldcarguy85 on June 04, 2013, 08:49:01 AM I just did this and i believe 10C54 was where i found ESKONF if i remember correctly. I'll check my XDF at lunch but I'm pretty confident you got it right.
Title: Re: correct ESKONF adress? Post by: player on June 04, 2013, 09:46:46 AM thx.
Title: Re: correct ESKONF adress? Post by: player on June 04, 2013, 09:50:57 AM 06a 906 032 HN ?
Title: Re: correct ESKONF adress? Post by: automan001 on July 10, 2013, 06:07:28 AM is this the correct adress for eskonf? Location is almost correct, at least it hits into ESKONF array, but I think you've changed wrong byte 6 instead of byte 3.You have to touch Byte3.LSHHK And optionally Byte5.SLP ESKONF in HN1 is same as in example here http://s4wiki.com/wiki/Tuning There is written: So, to remove the rear 02 sensor ESKONF is changed from: AA FF 00 30 FF F8 30 to AA FF 00 F0 FF F8 30 ;) Title: Re: correct ESKONF adress? Post by: player on July 11, 2013, 11:10:02 AM THANKS! but have allready sorted that out (thanks to ddlinger)!
|