|
Title: ME7 Connection Issues Post by: jturn241 on June 05, 2013, 05:27:50 PM I'm having trouble logging my S4. I can get the logger to connect and initiate with the car off, with the ignition in the on position.
As soon as I turn the car on I get the issue in the attached picture. I was able to get it to log for maybe 20 seconds once before it gave me the same error. (http://i1345.photobucket.com/albums/p666/jturn241/Logger_zps1867ce17.jpg) Title: Re: ME7 Connection Issues Post by: prj on June 05, 2013, 10:55:15 PM What ECU code do you have?
Let me guess - you have the speedo with the analogue time clock? Title: Re: ME7 Connection Issues Post by: jturn241 on June 06, 2013, 06:06:22 AM The car is 2001.5 with an M box ECU, 8D0907551M.bin is the binary file I used.
And no the clock is digital. Title: Re: ME7 Connection Issues Post by: vdubnation on June 06, 2013, 06:18:26 AM did you create your log template ? or did you try to use the preloaded
Title: Re: ME7 Connection Issues Post by: jturn241 on June 06, 2013, 06:30:09 AM I created a template usind ME7Info.
I had to adjust the connection speed to SLOW 0x00 on the ecu file as it wouldn't intiate a connection any other way. Title: Re: ME7 Connection Issues Post by: vdubnation on June 06, 2013, 06:52:49 AM if you have time i could help you out like a remote session
Title: Re: ME7 Connection Issues Post by: jturn241 on June 06, 2013, 07:52:39 AM Sent you a PM
Title: Re: ME7 Connection Issues Post by: Lupe-81 on November 13, 2013, 11:35:23 PM Can someone help me? I have this connection problem also. My S4 has analogue clock though and 551C ecu. I have wired new K-line straight from the ecu to OBD connector, but still most of the time it doesn't connect. Only very seldom it connects and I can log (very quickly before it loses its connection). :(
Title: Re: ME7 Connection Issues Post by: prj on November 14, 2013, 04:44:03 PM Can someone help me? I have this connection problem also. My S4 has analogue clock though and 551C ecu. I have wired new K-line straight from the ecu to OBD connector, but still most of the time it doesn't connect. Only very seldom it connects and I can log (very quickly before it loses its connection). :( Ok, if you want to log with 551c you must do the following: 1) Disconnect the existing K-Line from the ECU. 2) Immo OFF the ECU 3) Run K-Line directly from ECU to OBDII connector. Now it should work OK. I recommend using FAST init that way the clocks don't even try to wake up or do stupid stuff. Title: Re: ME7 Connection Issues Post by: chlippo on April 20, 2014, 03:26:52 PM I have pretty much same problem with my 2001 S3.
What i did is take out the instrument cluster and behind there is a green connector on the right side. I opened this connector (very easy) and take a piece of wire to connect 2 wires together, the wire that goes to pin 5 with the wire from pin 28, leave the pins like they were in the connector. I actually wired those to an outside switch so I can connect and disconnect those pins anytime without taking the cluster out. I still loose connection when i turn ignition on. What was the solution? Here is a video of my attempt |