NefMoto

Hello guys, this is a damos I made for a 06A906032KP but it is also compatible with other ecus. The damos is quite complete, about 160 maps, enough for a stg3 tune.

I've tested this damos with the following ecus: 06A906032KP, 06A906032HS, 06A906032HJ, 06A906032HP, 8N0906018AM.

Tell me if you found something incorrect or need additional maps


update:

rear O2 sensor delete:
CLAHSH
CLAHSHE
CDHSH
CDHSHE
CDKAT
CDLSH

Nice one. Any idea if the 6032HN is compatible?

This damos isn't compatible with HN, sent you a pm..

Awesome! Thanks :)

Would this work for the 6032NK? :D

p.s. is there any chance you could post a link to all of your DAMOS files for the 032 series ECUs?  basically all the VW versions. :P

Thanks man!

Does this work with an LP?

Added rear O2 delete maps for your swap project in the original post

SAI and EVAP
CDSLS
CLASLPE
CLASLVE
CDLDP
CDTES
CLALDPE

These maps are which I use to avoid a CEL when I flash us-spec files in my car. Maybe somebody can confirm if these are enough

Hi!
Sorry for my ignorance, this definition file is for WinOLS?
With this file I can identify the different maps in .bin file?

Tnks a lot!

Yes, you are correct

Can you tell me if it is also compatible with 06A906032MJ and 06A906032T ?

For MJ you can use this one http://nefariousmotorsports.com/forum/index.php/topic,576 (http://nefariousmotorsports.com/forum/index.php/topic,576)

Thanks a Lot  ArgDub !!

Do you also know what defenition file i can use for 06A906032T ?

It seems that my 1.233 version of WinOls is not compatible with this file. After which version of WinOls it this file compatible with?

It seems that you are using very old version boy - try update to 2.03 ...

will this work with 6032HF?

Try it and let us know

just had a quick look, and yes, it seems to fetch all the right values even for this HF box.

ok sweet. next question. I'm a newbie to vw tuning hehe... this opens in winols correct? I can only find a beta version of ols... I'm wanting to play around with this... I've got a ecu for my jetta(bought new one, got inmost reprogrammed and it wasn't the issue) is there a writeup of something explaining winols and where can I look for a good copy of it?

What I've noticed, not every 032HJ is equal to 032HJ. I have two versions, my original is 0003 (year 2004) and spare (year 2001) is 0002. Spare corresponds to definitions in this topic but my original, 0003 fits perfectly to HN definitions :)

Both of them works perfectly despite different map locations.

Any special that has to be done to import a map pack?  I have WinOLS 1.721 and the map pack for HS.  I created a new project, imported the binary for 032HS provided by ArgDub, then try to import the map pack he provided.  It asks if I want to apply a map offset, I leave that all blank, and then hit ok.  It doesn't throw an error but maps are never added.

Not sure if I'm missing a step or a checkbox somewhere. :(

Hello is there any way you could upload the .KP map pack for Winols 1.236?, not possible to upgrade to a newer version at the moment. Thanks

yea i would really like these in .xdf if possible?

Could someone downgrade kp file to 1.2 ols version by opening and exporting it as 1.2?

Can I donate via paypal ? Awesum stuff ... drop me a pm for donation... I dont mind at all..

Will this def work on a 032FE box ?

Edit: Solved.

I have HS with SW0007. This def seems to match up and all but I cannot find TNMXH. I'm trying to do the "soft" launch and TNMXH is the last thing I need to change.

Will you update the definition when you get a chance or tell me how/where to find TNMXH?

Thanks!

16B00 TNMXH Maximale Zeitdauer für erhöhte Drehzahlgrenze (1x1)
/s
      -
      0
-   0   0.0000

I found it using definition of Audi TT 225 BAM 8N0906018CB opened in left window and in right window I opened HS 0007 hexdump, found KFMIOP and below it found group of values with same offsets from previous map, including TNMXH. You can easily use the same technique.

+1 for the xdf of this is there any way to convert it?

HEy I also wonder if this will  work for 6032LP and also +1 for .xdf version. Thanks

Here you go, exported as .csv. Just open it with excel and you can easily make an xdf.

do we know if this works with 6032DL? 

how do you convert to XDF?

By opening it up alongside tunerpro, selecting NEW XDF, and entering the names and locations for the maps you need. There is no simple way to convert it.

theoretically you can adapt mapdump to convert csvs exported from winols into xdfs

This works also on:

 - '0261207773'         (SSECUHN)
 - '1037363059'         (SSECUSN)
 - '06A906032LM '       (VAG part number)
 - '0001'               (VAG sw number)
 - '1.8L R4/5VT     '   (engine id)

Thanks, ArgDub..

Anyone know the location of MLMAX ?

Anyone have .xdf working with 032DE and 032FC? I can't find it anywhere ( engines 1.8T AUQ and AUM )

hi ArgDub,

Your file was very helpful for me. But I couldn't find many map there so I've added a lot of maps in your definitions files.

Thanks for your efforts!

Regards

Hi guys what is the torque limiting map in this pack? There are a few things mentioning torque limiting and im a little confused  ??? i am obviously new to ecu tuning and really want to start learning. a friend told me to start with tweaking the torque map and see how that goes to get the hang of things. thanks so much.

ps i have a spare ecu. this is the stock map i want to play with. 

Would this be compatiable with 8N0906018AQ Audi TT 180HP ???
I'm hoping it will .. whats 2 letters between friends !!

And what about CWKONABG? Is it in this definition file?

But This is .kp file for Winols, not damos. Can someone export in true damos format (.dam) and publish it here?
Thanks

would this kp file work on 06A906032CL V004 354128 and 06A906032LP 0007 367518