|
Title: A box XDF File for EGT Code out Post by: andymassar on June 10, 2013, 06:45:44 AM Know everything I need to do, used Snow Troopers A box XDF file, but for coding out the EGT's I could not
change the offsets for CDATR and CDATS...my question is, is there an A box XDF that will allow me too? Or are these parameters ones that I could only change on an M box and not an A box? I was able to change TABGSS and TABGSS2 to their highest values, but that did not work in the car with solving my problem. Any help is appreciated. Thanks Fellas, Andy Title: Re: A box XDF File for EGT Code out Post by: vdubnation on June 10, 2013, 07:38:18 AM M box is pretty well defined and it interchangeable between a and m. I would just use mbox change the maf criteria accordingly make all the changes you want and flash it .
Title: Re: A box XDF File for EGT Code out Post by: andymassar on June 11, 2013, 09:40:40 AM Ahh I see, I was kind of thinking I could do that. So I could simply "convert" the m box tune I have to work on my A box, will that require me to recode my cluster? Last question, I would still use my m box xdf to edit it correct?
Title: Re: A box XDF File for EGT Code out Post by: hello on July 16, 2013, 07:31:39 PM Correct. Use the maf from the abox and then after you flash use vcds to enter 17:instruments, the adaption,60, enter 1025 save and you're set.
|