|
Title: ME7.5.20 Logincode 03c906057M/AG Post by: Deus Violentia on February 22, 2011, 08:48:58 AM Hi guys,
first of all, great forum and a lot to learn. I am normally messing around with EDC15/16, just in case somebody has a question. I need help with a ME7.5.20, I need to pull out the PIN for the immo, but how?! Anyway, ME7.5.20 seems a bit more advanced then it Title: Re: ME7.5.20 Logincode 03c906057M/AG Post by: carlossus on February 22, 2011, 11:50:35 AM I used VAG K+CAN commander 2.5, a cheap KKL cable and the ODB port.
Title: Re: ME7.5.20 Logincode 03c906057M/AG Post by: Deus Violentia on February 23, 2011, 04:00:43 AM Hi, that means you got a version of k+can without dongle or how did you do it?
The best for me would be a tool for a dumb KKL interface to be honest.... Title: Re: ME7.5.20 Logincode 03c906057M/AG Post by: carlossus on February 23, 2011, 07:35:20 AM Hi, that means you got a version of k+can without dongle or how did you do it? The best for me would be a tool for a dumb KKL interface to be honest.... The version I have works with my dumb kkl cable. If you can't find this version then it is also possible using monoscan as I found out thanks to eliotroyano a couple of days ago. http://www.nefariousmotorsports.com/forum/index.php?topic=89.msg2627#msg2627 Then do this to find the pin http://www.nefariousmotorsports.com/forum/index.php?topic=300.msg1913#msg1913 I can't give much more detail from here, but reply if you need some more help. -C Title: Re: ME7.5.20 Logincode 03c906057M/AG Post by: Deus Violentia on February 23, 2011, 09:37:02 AM OH GREAT! I had already read about MonoScan, and I have a K+CAN Version i will try out ;D
THANKS for the link regarding the location of the login within the dump! Title: Re: ME7.5.20 Logincode 03c906057M/AG Post by: eliotroyano on February 23, 2011, 09:10:30 PM The version I have works with my dumb kkl cable. I can't give much more detail from here, but reply if you need some more help. Carlossus can you post the version software do you have? I know that are some versions out there but it will be nice to have a tested one from a secure source. Monoscan is very useful but only for one group of VAG registered modules. At the moment that you try to connect to a different one, not registered in the software, it comes back to non-registered version left you with only 60sec to use to program and some functions disable.-C Title: Re: ME7.5.20 Logincode 03c906057M/AG Post by: carlossus on February 24, 2011, 01:59:22 AM If you Email me using the envelope icon I'll send you some more details.
<<<<< Title: Re: ME7.5.20 Logincode 03c906057M/AG Post by: eliotroyano on February 24, 2011, 07:18:11 AM If you Email me using the envelope icon I'll send you some more details. Thank you.....<<<<< |