NefMoto

Does Some of you have .ols for my ecu 8L0906018M  ?

I posted an 018F ols, what's the problem? I looked at the files, they're nearly identical?

hi ddillenger ,
thanks for your patience
maybe I'm doing something wrong.
the file and 'similar to the 86%.
when I import the file I choose "continue and import project data from above". the project above is the 'ols that you posted; so I can see the various maps divided by id
but if I open the maps do not have valid values

I'm clearly wrong to compare it, isn't it?

You need to line the maps up side by side using compare, offset the projects until they match, and transfer the map data one by one.

thanks again,
so de differenti is only in the offset?
ti ringrazio
ora provo ad identificare le mie mappe!! :)

The primary difference is in the offset, but it's not like the entire file is offset the same amount. You'll have to play with it until it lines up. Use your best judgement. It really is easy.

If you're lazy, you can TRY flashing the 018F. It should crossflash just fine.

perfect I think I understand.
i'd prefer to work a little more and use my file :) thanks again!

good morning ddillenger,
Hi
I used the WinOLS function  "connect windows" to connect the maps of the 2 projects.
by selecting ols ids that interest me I found the correspondence in my project.
I manually copied the properties of the .ols tables in the properties of the tables that I have identified in my .ori

the values ​​in the tables are the same but the values on the axes no :(
Can I change the values ​​on the axes manually? 
would  this be to change the values ​​in the original map?

When you were comparing and copying did you get a prompt that winOLS found a matching axis at a different location? What version do you have?

hi ddillenger,
I tried again the process now on the PC's work  and here I have the same values ​​on the axes too ( it works fine!! ).
this evening I'll try again on my pc

I was wrong to use the option organization: 2d Inverse
now works fine :)

bad news
I can not create my ols.

I'd like to find the following maps:
krkte (found)
KVB (not found)
fkkvs (not found)
kfmirl (found, recognized as a possible map automatically)
kfmiop (found)
kfzwop (found)
kfzwop2 (found)
ldrxn (not found)
ldrxnzk (not found)

how can I do to find the "not found" maps ?
thanks

LDRXN 1C022
LDRXNZK 1C064
KVB 19A9C
FKKVS 1B028

thanks again for your help
I still have problems to transform these values ​​into the map.
I try to explain better with an example

now i know that LDRXN start from 1C022 and that includes the 16 successive values.
I've selected this exadecimal value, but how can i transform them into map?

Line up the start of the map in the 018F OLS with the start of the map in your OLS. Then, hit TRANSFER MAP, making sure to JUST transfer map structure, not data.

I'm probably doing something wrong
1C022 address is not on the top left: (when i transfer new map map start at 1c020
What should I do? : (
thanks for your patience

this is my ols!!!! :)
how can I verify that it is correct?
I think I have done something wrong for maps ldrxn / ldrxnzk
how can I check that?
thanks

ldrxn / ldrxnzk seems correct!

now i'm looking for pressure turbo maps

kfldrl
kfldimx
kfldrq2

ddillenger can you help me?

I'm sorry Dan, I've given you everything you need to do this yourself, then I gave you the benefit of the doubt and found some of the maps for you. The only help I'll give now is finding something not defined in the 018F OLS (which won't happen). Just practice, you'll get it.

hi ddillenger.
I did not want to sound lazy.
I'm no expert and WinOLS seems very anti intuitive for me :(
various colors confuse me and the options to use  seem to be well hidden.
but .. now I have my ols!! :)

Good deal! I wasn't saying you were lazy, just that if I did it for you you'd never learn. Good luck!

thanks! :D

I looked it over, you will need to locate kfldhbn and kfzw at minimum for tuning.

thanks
this evening i will look for this map :)

Just as Didilinger said , but try it in 2D mode ,its much easier for common maps.
When you find it hit transfer map structure only (the bottom last one)

my new ols with  kfldhbn and kfzw/2

Do you think DSLOFS map is correct?
i write new map, control pressure is ok real pressure read by vag seems ok... but pressure read by my pressure gauge is not correct :(

new ols with uadplmn uadplmx uadpumx

there is an easy way to copy a map from an ecu to another similar ecu?
is the only way  have complete .ols?

is my kfmldmx correct?

thanks

Dan:

Email me.

ddillenger84@gmail.com

Search dont show this file, is it still available?