|
Title: FTOMN for 2.0TFSI coils? Post by: masterj on June 21, 2013, 09:27:35 AM Hi, guys! Just a quick question here for those who converted their coils to 2.0. What minimum "active" time you have put into FTOMN? Seems like MED9 doesn't have this min limiter at all. Should we just disable it? :) Thanks
P.S> My stock file setting is 0.5ms Title: Re: FTOMN for 2.0TFSI coils? Post by: rnagy86 on June 21, 2013, 10:13:59 AM In my file I have it set to 0 from the factory value of 0.50.
EDIT: I also have ALS/NLS so it's set to 0. I don't seem to find FTOMN in the list uploaded by nehalem in the coil_conversion.xlsx file. Title: Re: FTOMN for 2.0TFSI coils? Post by: masterj on June 21, 2013, 02:07:42 PM In my file I have it set to 0 from the factory value of 0.50. EDIT: I also have ALS/NLS so it's set to 0. I don't seem to find FTOMN in the list uploaded by nehalem in the coil_conversion.xlsx file. FTOMN = 0 == coil death on my ecu :) so it has to be something bigger than 0... Title: Re: FTOMN for 2.0TFSI coils? Post by: professor on June 21, 2013, 02:32:55 PM 0 here too, using 2.0 tfsi coils and nls/antilag.
All ok so far (with lowered dwell times). |