|
Title: 2000 A4 1.8T ATW Engine - 4B0 906 018 P - PLEASE HELP Post by: gevorg23m on June 23, 2013, 10:39:36 PM Can some one please help me figure this out.
1. How do I read the stock ecu (.bin) file with nefmoto? what type of memory layout do i chose in order to fully read the ecu? 2. Which .xdf file is compatible with this (4B0 906 018 P) ECU? I've flashed a whole bunch of s4/a6 2.7T's but its like almost impossible to find any resources for this one. Help would really be appreciated . thank you. Title: Re: 2000 A4 1.8T ATW Engine - 4B0 906 018 P - PLEASE HELP Post by: ddillenger on June 23, 2013, 10:50:14 PM Can some one please help me figure this out. 1. How do I read the stock ecu (.bin) file with nefmoto? what type of memory layout do i chose in order to fully read the ecu? 2. Which .xdf file is compatible with this (4B0 906 018 P) ECU? I've flashed a whole bunch of s4/a6 2.7T's but its like almost impossible to find any resources for this one. Help would really be appreciated . thank you. Memory layout: 29F400BB XDF: There are none posted. If you have a specific address you need, let me know. I have defined the file and have a pretty decent winOLS definition. As for reading with nefmoto, it may not happen. Some of the narrowband 1.8 ecu's are tricky. Title: Re: 2000 A4 1.8T ATW Engine - 4B0 906 018 P - PLEASE HELP Post by: deadeye419 on April 17, 2022, 07:30:06 AM I have a 2001 4b0 906 018 q I have been looking for mslub and mslbas and having little luck. I have tried all the xdf's and kp's that I can find for it none of them are the Q just the 409 906 018 part matches. If you could help me with the address's I would be forever grateful.
Thanks |