NefMoto

Moved from other thread

anyone can help me tune a rs4 b5 euro with the following mods:

jhm rs6-r k04 turbos
siemens deka 630cc injectors with 4bar fpr
front mount intercooler
3.5 downpipes with no cats
s3 dumb valves
bosch 044 fuel pump
brand new rs4 maf
audi rs2 spark plugs

i live in morroco and got almost all parts from germany the problem is there is no dyno in here :/ and no one seem to know how to tune my car if someone can help tune it i will be very greatful i can upload my original file if anyone can do it.
sorry for bad english

anyone can help me tune a rs4 b5 euro with the following mods:

jhm rs6-r k04 turbos
siemens deka 630cc injectors with 4bar fpr
front mount intercooler
3.5 downpipes with no cats
s3 dump valves
bosch 044 fuel pump
brand new rs4 maf
audi rs2 spark plugs

i live in morroco and got almost all parts from germany the problem is there is no dyno in here :/ and no one seem to know how to tune my car if someone can help tune it i will be very greatful i can upload my original file if anyone can do it.
sorry for bad english

seems no one is williing to help :_( plz someone i have done the mods to car and i need to tune it so sad no one do that in my country now its 6 months the car is sitting idle because the siemens 630cc need a tune to work .

Download the nefmoto base tune. It's setup for 630cc DEKAs.

i did download the base file but i have no idea how to edit tuner pro and cheksum correction to make it work for my car i ve been reading the guides for many days but i dont seem to understand everything im scared to do something stupid :( i have a k box

im tryng to tune my ecu like i said before i have an rs4 b5 8D0907551k and since its been 6months i have been asking for help and no one seems to care :p i just need a working xdf for my bin file i used the one on the forum 551k.xdf but i cant change values in krkte i just want to know if 8D0907551M.xdf will work for my file?
another thing i compared kekte in my bin file with stage3 base tune from tony it reads 0.04673 ms in tony's file and 3.76457 ms in my rs4 bin file i relly dont understand.

MAF is different between those two files.

other that that, you can use mbox on a k-box car.


is KRKTE defined with the same scaler in the two definitions you are using?

how can i do that what files tool do i need im really new to all this tuning stuff actually i was hoping that i could paye for the tune but in my country no one seem to know how to tune my setup any help would be appreciated

http://s4wiki.com/wiki/Tuning

Also, i have moved this topic to the tuning board.

to be honest tony i have no idea what im doing im just tryng to apply what i have read so far in the forum from what i understand the xdf from m box isnt not compatible whit my k box bin file and i cant seem to find a xdf for 8D0907551k.bin i have been searching for days whit no luck i found one in the forum but is messing some maps and i cant change the krkte with it :/

Make your own, or wait for somebody to do it for you.

There is an F box def (kp and xdf) around that is a starting point.

http://nyet.org/cars/files/defs/

Defining a map pack is time consuming, but not that difficult if you are willing to put in the effort.

I am currently working on a K map pack but i haven't had enough time to dedicate to it to finish.

im willing to put some effort in to it i just need someone to show me and guide how to do it and send me the right files like i said im new to all this but after the time i have spend on my car i dont want to give up :)

I started arranging it, most is correct. All the normal things are. Good luck in your quest.

thank you so much :D

You can buy a tuning file ;-) or go to a tuner and all is good i don´t unterstand the Problem

Stop reading guides, and go here

http://nefariousmotorsports.com/forum/index.php?topic=455.0title=

the probleme is there no tuner with dyno in my country and they have never tune a rs4 before (they tune diesel car mostly with files downloaded from the web) i will glladly paye for the tune if somone can do it

I wouldn't trust anybody to do it remotely for you. You really are best off putting in the time to do it yourself, or just sticking to stock.

Just my two cents.

anyway i want to thank every one here for the help and all the utilitys and files you guys are awsome i will take my time to get the tune done i have no other choice.

Just contact prj on the forum. I am sure he'll tune it for you if he has the time and you can agree on the price. I am not trying to stop you from tuning it yourself but if you are just starting out, it won't be easy. I am also not trying to advertise anyone but prj is really knowledgeable with the K box and RS4s.
Especially if you are running K-box code which differs a lot from the S4 bins out there, a lot of stuff like boost PID is setup differently and there is also undocumented behavior, which you can't find in the FR.

i did talk to prj and we are tryng to find a way to do it thank you for the advice :)

Who did you bribe to get this stickied? I can only assume it was an oversight.

sorry i didnt undertstand what you meen my english isnt perfect

probably an oversight by me when I was trying to merge threads

BOSS LIKE! Thankyou!