|
Title: Weird duty cycle problem at lower RPMs Post by: savages4 on July 23, 2013, 05:19:07 PM So I can't figure out why but my duty cycle becomes erratic from 2750-3500 rpms, it should be at 95% duty helping me spool as fast as possible, however its dropping down to 70 from 2750 and then resuming back up at 3500 rpm. I've attached the log, and then file, I can't see why its happening as DRL is set to 95 in those areas, and KFLDIMX isn't preventing it either.
Title: Re: Weird duty cycle problem at lower RPMs Post by: nyet on July 23, 2013, 06:27:56 PM Looks like your I is not 95 in those areas.
maybe not enough LDRXN early enough, or not enough P. Or maybe even not enough I. didn't look at your bin yet, i'll try to later tonite time permitting. Title: Re: Weird duty cycle problem at lower RPMs Post by: pablo53 on July 23, 2013, 07:26:13 PM Q0DY drops off too soon (like a k03 map). Keep your LDRQ0DY at 20-30 or so in your spool rpm range.
|