NefMoto

I have attached two .bin files and a definition file.
One is my standard map, the other is a tuned map on a friends car.

1. I'm not sure if I'm using the right definition file. Can anyone confirm?
2. Assuming the definition file is correct, I can't see many changes. What have they done to make it better?
3. After I've made sure the checksums etc are good on my friends file, can I just flash it to my ECU? From my reading, I shouldn;t have any troubles with immobiliser etc.

Thanks a lot  8)

Your Octavia file is 06A906032HN. The definition file you're trying to use is for an S4 file, 8D0907551M. They are not compatible. You need a definition file for YOUR file.

Thanks for the heads up. Any tips on how I can find the right file? I've tried searching vRS, Octavia, auq, etc etc but can't seem to find it.

I've just came across this file 8D0907551M_AlNls_v2.xdf
Is this correct?

Does 8D0907551M sound like 06A906032HN?

My bad, I didn't realise that was a part no. So basically I need 06A906032HN.xdf?
I must have spent the best part of 6 hours of constant reading and still feel lost lol  :P

I dont think there is a HN xdf ,at least I couldnt find any.Use this
http://nefariousmotorsports.com/forum/index.php?topic=4171.0title=

the HS one as a reference and create one for yours.  :)

Thanks, you've been a great help. Will have a look later this evening.

Hi, I downloaded that map pack, but I can't seem to do anything with it in TunerPro. It does import into Winols though. Can this be made to work tunerpro? It looks a lot easier to use. I've done some more reading but haven't found a way yet.

On another note, can tunerpro be used without a definition file?

Open your definition in winols.
Open tunerpro. And copy the map adresses, offsets etc etc from winols and create your own xdf in tunerpro.
If they don't match then open ols file in winols and your original binary. Compare files and find the maps you need in your Ori then copy addresses to tunerpro

I have uploaded ols file which includes full map pack for hn somewhere in dfn subforum

Don't suppose you've got a link, or can remember the thread title so I can do a search?

give me the names of the maps you'll need and ill make an xdf!

if you think reading 6 hours is hard work, then wait till you have read/spent ++100 hours on these forums, and realiasing that more you read/learn, the more you realise you dont know

Couldn't have said it better. The more you learn, the more you realize you don't know.

Haha, I know exactly what you mean. I'm sure the more I read, the more confused I get lol

I want to find the CDKAT bit to remove the rear o2 sensor. I also wanted to check the boost settings. We've got uneven boost readings across the rev range, not sure if it's due to the map or a hardware issue yet.

And, if I can work it myself with more reading, I want to add antilag/launch on the spare space of the memory.

well, then keep reading and use the search function everytime you see a word you arent familiar with, then maybe in a couple of months you can make a reliable map youself, and dont need these tuned files from other people/cars anymore

1: open the HN ols file in winols.
2: import your tuned file in winols
3: connect windows/projects
4: press the "next diffenrence" button. then winols will go to the next edited map. and you can see what have been changed. double click the map you wish to get in your xdf in tunerpro. that will get you to propperties of the map.
5: open tunerpro and you binary
6: click new xdf
7: right click and choose "add new xdf parameter" in tunerpro
8: copy all adresses, axis data and values from winols to tunerpro.

save changes. keep adding xdf parameters until you have all the maps you need in tunerpro. its a lot of work, but you will find out :-)

if you are insecure that the map cause the boost issue then flash the stock binary and log (if your engine is stock). still there -> hardware issue.

Thank you for the help. Much appreciated. I'll give it a go  :)