|
Title: peugeot 206 1.6 16v bosch me7.4.4 Post by: roy_bws on September 25, 2013, 05:23:24 AM Hi, i'm trying to understand my car's ecu but i can't found info for locate maps. Anyone can help me? Any info are welcome. Upload my original file readed directly from 29f400bb using gq4x programmer.
If i can make a map pack for this ecu will share it for all people. Sorry for my english level and thanks!!=) Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: roy_bws on October 04, 2013, 12:55:35 PM Nobody knows anything about this ecu?
Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: hammersword on October 04, 2013, 04:33:50 PM what are you looking for this ECU?
It is ME7 so it has same ME7 logic as VAG ME7! Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: roy_bws on October 07, 2013, 04:52:10 AM what are you looking for this ECU? It is ME7 so it has same ME7 logic as VAG ME7! I've readed s4wiki and a lot of info from this forum but map directions and others don't are the same... When i look in hexdump cannot find all maps i need. I've located ignition advance map, one of the ignition limiters, torque map, one of throttle body map and one of injection. I have a mappack from other me7.4.4 with more maps but sw and hw is different and directions don't are the same. Sorry if my questions are very basic but do not know where to start. Thanks for your reply!!!!! Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: fredrik_a on October 07, 2013, 10:50:47 AM Honestly, how much improvement are you realisticly looking for in an NA 1.6 l engine...? Why bother?
Anyway... It's all there quite straight forward. Ignition, KFMIOP, KFMIRL, KFPED, fueling etc you can spot just by visual apperance if you have another defined VAG-file for instance... Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: terminator on October 07, 2013, 11:36:44 AM +2 hp and 3 nm :)
Actually I spent some minutes and I found all maps for stage 1 except LAMFA. Maybe it has KLLAMFA, so it doesnt look like VAG map. Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: roy_bws on October 07, 2013, 12:12:03 PM I have a supersprint exhaust manifold and oreca gr.n exhaust.
In my garage i have camshafts from saxo vts 16v and i want buy bmc cda or similar. I do not care if i win a lot, my objective is learn and only have this car. Sorry if I did not express very well. Thanks for replies=) Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: terminator on October 07, 2013, 01:55:11 PM What exactly maps you are looking for?
Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: roy_bws on October 07, 2013, 02:50:17 PM What exactly maps you are looking for? I think i need spark advance, injection and throttle body maps. Lambda and torque limiter is not a problem. Do you think i need more maps? can you recommend a definited file of similar ecu to compare? I'm not looking for others do the job for me, just want to find where to start. Thanks!!!=) Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: roy_bws on October 07, 2013, 02:55:35 PM Honestly, how much improvement are you realisticly looking for in an NA 1.6 l engine...? Why bother? Anyway... It's all there quite straight forward. Ignition, KFMIOP, KFMIRL, KFPED, fueling etc you can spot just by visual apperance if you have another defined VAG-file for instance... Sorry but i don't understant first part of your reply. You mean how much i want win in my engine? Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: IamwhoIam on October 07, 2013, 03:12:29 PM Sorry but i don't understant first part of your reply. You mean how much i want win in my engine? win=gain Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: roy_bws on October 07, 2013, 03:25:22 PM Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: terminator on October 08, 2013, 05:16:33 AM Enjoy ;)
Seems like I found LAMFA. Also I'm not 100% sure about KE1N (2,3,4 :)) offset, anyway I dont think you should change it. Maybe add 10%, but its for your own risk. Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: roy_bws on October 08, 2013, 03:05:35 PM Thanks terminator!!!!!!!!!!!!!
You use a newest version of winols and i can't open it but i will try to install new winols demo on other pc and use it for compare and serch maps in my file. Winols demo can open .ols files or only work with binary files? Thank you!!!!!! =) Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: terminator on October 08, 2013, 05:05:48 PM Try this file, its for an old Winols. ;)
Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: terminator on October 08, 2013, 05:21:43 PM I made mistake. KFZWOP offset is 1052E (not 1052D)
Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: roy_bws on October 09, 2013, 11:55:11 AM Thanks!!!!!!!!!!! :) :) :) :) :)
Title: Re: peugeot 206 1.6 16v bosch me7.4.4 Post by: nikolovs on October 16, 2020, 09:07:57 AM Hello to all,
I want to remove the ecu sagem s2000 from TU3JP and to put the bosch me7.4.4 from TU5JP NFU . I have found some basic maps but I want more full damos file or map description, because the injected fuel are not the same for engine TU3JP its a 1.4 liters 75 hp. Do you have more detailed info for bosch me7.4.4 ? Maby I have wonder how to change the VE table ? |