|
Title: Lamfa - 018H Post by: carsey on September 30, 2013, 05:14:15 AM Hi
Edited the LAMFA axis for my TT 018 H 004 ECU. Does it look right? I had a issue with it editing the map data when changing the pedal position axis, so managed to transfer map over from a 018 CB ols with the correct offset. (http://i93.photobucket.com/albums/l42/carsey2006/lamfa-1.jpg~original) Is it right? Thanks Chris Title: Re: Lamfa - 018H Post by: carsey on September 30, 2013, 05:16:06 AM Actually looking over it thats going to give 0.95 lamda up until 60% pedal then drop to lambda 1.
Should the 0.95 go all way up to 90% then tune the 100% axis to the correct AFR i want to set? Title: Re: Lamfa - 018H Post by: panos1975 on September 30, 2013, 05:29:41 AM I think you have to correct map offset and pedal axis( 50-100)and enrich the two last pedal axis.This is only my opinion, newbbie here.
Title: Re: Lamfa - 018H Post by: carsey on September 30, 2013, 05:32:02 AM snap with the newbie lol.
Now have this. (http://i93.photobucket.com/albums/l42/carsey2006/lamfanew.jpg~original) Title: Re: Lamfa - 018H Post by: ddillenger on September 30, 2013, 07:01:16 AM Looks like lamfa is defined incorrectly in your file.
Title: Re: Lamfa - 018H Post by: carsey on September 30, 2013, 06:40:50 PM Sure it was from the one you dropped me the other week.
Title: Re: Lamfa - 018H Post by: 20VTMK1 on October 02, 2013, 01:46:37 PM In the 018 CB OLS lamfa is wrong , there is an issue with the % axis as well as the map start position if memory serves me correct . I can help you with 018BQ
Offset for map is 0.114851 , 6 x 15 map Starts at 1CD9C . Shout out if you need more info Title: Re: Lamfa - 018H Post by: littco on October 03, 2013, 12:33:14 AM In the 018 CB OLS lamfa is wrong , there is an issue with the % axis as well as the map start position if memory serves me correct . I can help you with 018BQ Offset for map is 0.114851 , 6 x 15 map Starts at 1CD9C . Shout out if you need more info Map 0x1c98e Conversion 0.007813 Rpm 0x1c972 8bit Conversion 40 Pedal 0c1c982 16bit Conversion 0.003052 Title: Re: Lamfa - 018H Post by: carsey on October 03, 2013, 05:12:50 AM Map 0x1c98e Conversion 0.007813 Rpm 0x1c972 8bit Conversion 40 Pedal 0c1c982 16bit Conversion 0.003052 Legendry thanks :) Managed to put that in a 018CB file and transfer the map over to the 018H after matching the hexdumps up. NOw scale goes, 50, 60, 70, 85, 99, 100% on the RPMs with the lambda last row on the list :) Cheers! Title: Re: Lamfa - 018H Post by: 20VTMK1 on October 03, 2013, 12:17:55 PM Sorry mate ,
I see my modified post didn't show . I put up the info for the CB file .. Apologies |